Instruction Manual

1-5 Connecting the SL-V and the Computer

1-8

Before Use

SL-VH1S-NO1-E

This section explains how to connect the SL-V and the computer.

• Turn on the power after all of the connections are completed.

• Turn off the power before removing any of the connectors.

• When the SL-V is positively grounded using the SL-V connection cable for the NPN output type,

do not ground on the computer side. (Communication cannot be established if grounded.)

1 Connect the SL-V1UB interface unit cable to the SL-V receiver.

2 Connect SL-V device cable (receiver) to the SL-V1UB interface unit.

3 Connect the SL-V1UB to the computer with the USB cable connected to the SL-V1UB device.

Connecting

Note

SL-V1UB

KEYENCE CORPORA

TION

http://www.keyenec. com

MEDE IN JAP

SL-V connection cable

(Black coating)

USB cable included with the SL-V1UB

Connect to the USB port on the computer