Instruction Manual

2-1 Names of Parts in Main Window
2-3
Basic Operation
2
SL-VH1S-NO2-E
Item that can be configured in the function configuration area is switched by clicking on the
Configuration tab.
This is a area for actual configuration. Displayed item varies depending on the selected Configuration
tab.
For description about each configuration, refer to "Chapter 3 Configuration of Each Function" (Page 3-1).
This will display the communication status and the login status with the SL-V.
Configuration Tab
Item Description
Safety Related
Configuration
This will configure the safety related configurations, such as muting or interlock.
"3-1 Safety Related Configuration" (Page 3-2)
Non Safety Related
Configuration
This will configure the functions useful to control, such as state information output or how
the indicator is turned on.
"3-2 Non Safety Related Configuration" (Page 3-4)
Blanking Area Beam axis where the blanking is enabled can be configured.
"3-3 Blanking Area" (Page 3-6)
Muting Area Beam axis where the muting is enabled can be configured.
"3-4 Muting Area" (Page 3-7)
Function Configuration Area
Status Bar
Status Description
This is indicating that the <SL-V Configurator> and the PC is communicating.
This is indicating that it has logged in to the SL-V. Uploading of the configuration or
change of password is possible.
This is indicating that it has not logged in to the SL-V. Uploading of the configuration
or change of password is not possible.