Instruction Manual

2-4

Basic Operation

SL-VH1S-NO2-E

2-2 Flow of Basic Operation

This section describes the basic flow of operation of the <SL-V Configurator>.

Have the <SL-V Configurator> installed on the PC before proceeding.

"1-4 Installing the <SL-V Configurator>" (Page 1-5)

Configuration is created on the PC. Configuration can be created on the PC while it is not connected to

the SL-V.

Upload the configuration created on the PC to SL-V.

Note

Creating the Configuration on the PC

Start up the <SL-V Configurator>. Page 2-5

Select the startup method. Page 2-5

Configure the functions. Page 2-8

Uploading the Configuration to the SL-V

Connect the SL-V with the PC. Page 1-7

Set up the password. Page 2-9

Upload the configuration to the SL-V. Page 2-11

Save contents of the configuration on PC. Page 2-13

Exit the <SL-V Configurator>. Page 2-7