Instruction Manual

2-9

Basic Operation

SL-VH1S-NO2-E

2-5 Setup of the Password

Initial configuration of the SL-V password is necessary before uploading to the SL-V for the first time.

Be sure to keep the password in a safe place and do not forget it.

If you forget the password, configuration cannot be uploaded, initialized, or changed.

• Initial configuration of the password is only possible when the SL-V is connected.

• Initial configuration of the password is not possible if the password is already configured on the

SL-V or the <SL-V Configurator>.

• To change the configured password, refer to "4-6 Changing the Password" (Page 4-8).

1 Select [Authorization]  [Init Password] from the menu.

The [Initial Password setting] dialog is displayed.

2 Enter new password with 4 digit single byte numerals.

Enter the same password in the [New Password (confirmation)].

"0000" cannot be used for the password.

3 Click the [OK] button.

Password will be setup at the SL-V.

Password can be changed later. "4-6 Changing the Password" (Page 4-8)

Important

Note

Reference