Instruction Manual

2-10
Basic Operation
2
SL-VH1S-NO2-E
2-6 Login/Logout
It is necessary to connect the SL-V and login to upload the configuration to the SL-V.
• Login is only possible when the SL-V is connected.
"Connecting" (Page 1-8)
• Perform the initial configuration of the password before attempting to login.
"2-5 Setup of the Password" (Page 2-9)
1 Press the [Log-In] button in the Toolbar.
The [Password is required] dialog is displayed.
2 Enter the password and press the [Log-In] button.
Dialog will close, and [Status: Log-in] is displayed on the Status Bar.
It will automatically logout when a communication error occurs during the login. In that case,
check the connection status, and try to login again.
Press the [Log-Out] button in the Toolbar.
[Status: Log-out] is displayed on the Status Bar when you logout.
Note
Logging In
Note
Logging Out