User guide

ManualsBrandsKEYENCE ManualsSensorsSR-700 Series

E SR SCRIPT RM

5-1 Input/Output functions

This section describes basic functions for editing data of SR-1000/D100/750/700.

Edit read data

*1 The number of arrays can be obtained using the common function

"readCount()".

If idx is omitted, the first code is specified.

Edit image file name

*2 The number of arrays can be obtained using the common function

"imageCount()".

If idx is omitted, the first code is specified.

Data entry to readResult and imageResult

Reference

• The imageResult function cannot be used with the SR-700 Series.

• The functions that can be used vary depending on the model.

From section 5-2 to section 5-4, the applicable models are listed as

shown below.

: SR-1000 Series

: SR-D100 Series

: SR-750 Series

: SR-700 Series

readResult(idx)

Argument idx : Index for read information array

Return value return : Read value

imageResult(idx)

Argument idx : Index for image name information array

Return value return : Image file name

Example 1

Example 2

When "Single read" is performed on SR-1000/D100/750/700 by registering 3

parameter banks for which alternate reading is enabled.

• Read OK

When reading is successful with the first bank

When reading is successful with the second and third banks

• Read error

When reading fails

Read error image

readResult(1)

imageResult(1)

readResult(1)

imageResult(1)

readResult(1)

imageResult(1) imageResult(2) imageResult(3)

When 4 "Multi read" are set for "Bank 1 Code Settings" on SR-750/D100 by

registering 1 parameter bank for which alternate reading is enabled.

If 4 codes are read with Multi read set to Enable, the result is 1 image and 4

read data.

readResult(1) readResult(2) readResult(3) readResult(4)

imageResult(1)

1000

D100

750

700

5-2 Data acquisition functions

This describes the functions to obtain data of codes read by SR-1000/D100/750/700.

Functions used in readResult(idx)

These functions obtain information of read data. Use as readResult(n):***

Example) readResult(n):readData()

*1 The functions of the code reader main unit must be enabled beforehand.

*2 When using the script for the edit image file name, the file name after the image

file is changed is output. When multiple image files exist, the value of the Inter-

delimiter is the same value set for the SR-1000/D100/750/700.

Functions used when reading the GS1 composite

*3 When reading the GS1 composite (JAN/EAN/UPC), the 1D code and 2D code

are connected with a composite delimiter and then output.

*4 When reading the GS1 composite code, values of the 1D code and 2D code

are obtained separately, connected with a partition mark, and then output.

Functions used in imageResult(idx)

These functions obtain information of captured images. Use as imageResult(n):***

Example) imageResult(1):bankNo()

*1 If the script is not used with the SR-D100 Series, information called A:\IMAGE is

appended to the beginning of the image name, however, if imageFileNames()

is used, this information is not appended.

Function name

Argu-

ment

Return value Applicable model

readData() None Read data

symbolType() None

Code type (Refer to "8-3

Code type" (Page 19).)

symbolIdentifier() None

Symbol identifier (3 characters)

(Refer to "8-3 Code type"

(Page 19).)

bankNo() None Bank number

scanTimes() None Scan count

positonStableLevel() None Position measurement level

cornerCoordinates() None

Code top coordinates:

"X1/Y1:X2/Y2:X3/Y3:X4/Y4"

centerCoordinate() None

Code center coordinates: "X1/

Y1"

eccQuality() None

Unused error correction (0 to

100)

matchingLevel() None Matching Level (0-100)

i15415Verification() None

ISO/IEC15415 verification

result

aimVerification() None

ISO/IEC TR 29158(AIM DPM-1-

2006) verification result

as9132Verification() None SAE AS9132 verification result

semiT10Verification() None

SEMI T10-070 verification

result

japanMedicalVerification

()

None

Verification result of the Japan

ethical drug barcode

imageFileNames() None Image file name

readingDuration() None Reading duration [ms]

burstNum() None

Burst number when reading is

successful

errCode() None

Detail error code

This is output only for burst.

outonEvent(n)

Output

terminal

number

None

(The corresponding output

terminal turns on.)

Function name

Argu-

ment

Return value

Applicabl

e model

readData() None Read data

symbolIdentifier() None Symbol identifier

cornerCoordinates() None

Code top coordinates:

"X1/Y1:X2/Y2:X3/Y3:X4/Y4:

X1/Y1:X2/Y2:X3/Y3:X4/Y4"

centerCoordinate() None Code center coordinates:

matchingLevel() None Matching Level (0-100)

readDataCompositeLen

1D()

None

Data length of the GS1

composite 1D code

Function name

Argu-

ment

Return value Applicable model

bankNo() None Bank number or nil

burstNum() None

Burst number of a captured

image

imageFileName() None Image file name

readDatas() None

Character string data of the

barcode itself or nil

(Concatenated when multiple

data are present.)

readResultIdx() None

Index table of append data

(readResult(n)) or nil

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

D100

750

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

D100

750

700

1000

750

700

1000

D100

750

700

1000

D100

750

700

1000

750

700

1000

750

700

1000

700

1000

750

700

1000

750

700

1000

750

700

1000

750

700

1000

750

700

1000

750

700

1000

D100

750

1000

D100

750

1000

D100

750

1000

D100

750