Instruction Manual

ManualsBrandsKEYENCE ManualsSensorsSR-750 Series

E SR-750 UM

Appending Data

Various types of data can be appended to read data.

 Read data format

The data format for appending various types of data to read data is shown below:

Delimiter characters

• The colon (:) as a delimiting character can be changed via AutoID Network

Navigator (one character).

• No delimiter character is inserted after "Data size" and "Symbol ID", and before

"Checksum".

Precautions when appending data

• Appended data can be set via a command or from AutoID Network Navigator.

• Only the selected data will be appended to the read data. The data size changes

because of this.

• Checksum defers by the contents of the appended data.

Details of Appended Data

 Data size

The data size is the total size of parts (1), (2), and (3), plus 4 bytes.

 Time

Appends the time the data was output.

Appended data range: YYYYMMDDhhmmss

• Data format

 Read detailed error code

Factors that caused read errors are judged for each burst number.

The Read detailed error code is appended before the Read data.

n: Maximum value of the burst No.

• The detailed error code is appended starting with burst No. 1.

• The detailed error code is appended with the following contents.

 Code type

The type of read code can be appended before the read data.

Data

size

Time

Detail error

code

Code

type

Symbol

Read

data

Parameter

bank

numbers

Burst

number

Scan

count

Positioning

level

Code vertex

coordinates

Code center

coordinates

Unused

ECC

ratio

Matching

level

ISO/IEC15415

verification

result

ISO/IEC TR 29158

(AIM DPM-1-2006)

verification result

SAE AS9132

verification

result

SEMI T10-0701

verification

result

Image

file name

Group

name

Master/

Slave ID

Read

time

Check-

sum

YYYYMMDDhhmms : Read data

Burst number 1

detailed error code

Burst number 2

detailed error code

:…:

Burst number n

detailed error code

Read data

Detailed error code Description

0 Reading success

1 No code

2 The set decode timeout period elapsed.

3 Scanning aborted.

9 Reading images failed.

Code type ID Read data

0 Reading error

1QR

2 DataMatrix

5 GS1 DataBar

6CODE39

7ITF

9 NW-7(Codabar)

10 JAN/EAN/UPC

11 CODE128

(3)(2)(1)

Header

Data size Read data + appended data

Termi-

nator

Checksum

 Symbol ID

Appends the symbology identifier, specified by AIM, before the read data.

It is not appended when a reading has failed.

• Data format

 Parameter bank number

Appends the parameter bank number that was read.

It is not appended when a reading fails.

• Data format

nn = parameter bank number (01 - 10)

 Burst number

Outputs the burst number of the successfully read image in the burst read mode.

No data is appended for a failed reading.

This data is not appended in any mode other than the burst read mode.

• Data format

n = burst number (1 - 8)

 Scan count

Appends the number of reading attempts of the SR-750 Series while the timing

input is turned ON.

Failed reading operations are also counted.

• Data format

nnnnn = scan count (1 - 65535)

 Position level

Appends the position level of the read code.

When several codes are read for one scan (multi read), the average of all code

position levels is output.

0 is appended when a reading fails.

• Data format

n = position level value (0 - 5)

Symbol ID Read data

Code type Detail Symbol ID

QR : Model 1 ]Q0

: Model 2, ECI not applied ]Q1

: Model 2, ECI applied ]Q2

: Model 2, ECI not applied, FNC1 (1st) ]Q3

: Model 2, ECI applied, FNC1 (1st) ]Q4

: Model 2, ECI not applied, FNC1 (2nd) ]Q5

: Model 2, ECI applied, FNC1 (2nd) ]Q6

DataMatrix : ECC 200 ]d1

: ECC 200, FNC1 (1st) ]d2

: ECC 200, FNC1 (2nd) ]d3

: ECC 200, ECI applied ]d4

: ECC 200, ECI applied, FNC1 (1st) ]d5

: ECC 200, ECI applied, FNC1 (2nd) ]d6

CODE39 No check digit validation ]A0

Check digit is validated and transmitted. ]A1

Check digit is validated but not transmitted. ]A3

ITF No check digit validation ]I0

Check digit is validated and transmitted. ]I1

Check digit is validated but not transmitted. ]I3

NW-7(Codabar) ]F0

JAN/EAN/UPC UPC-A, UPC-E, JAN/EAN13 ]E0

JAN/EAN8 ]E4

UPC-A, UPC-E, JAN/EAN13

Addon 2, addon 5

]E3

CODE128 FNC1 not included. ]C0

FNC1 on the first digit (GS1-128). ]C1

FNC1 on the second digit. ]C2

GS1 Databar ]e0

Read data : nn

Read data : n

Read data : nnnnn

Read data : level = n