Owner's manual

2-3

Main Window

- Setup software TM-H1 TM-Navigator User’s Manual -

(3) Setting and operation area for program settings

Switches the program No. of which the setting will be changed.

* "Copy", "Paste", and "Initialization" act on the following settings:

• Head Settings

• Master Registration (including the master image)

• Position Correction

• Measurement Settings

• OUT Settings

• Common Settings

Configures the settings for storing measurement data in the controller.

Stored data can be displayed on TM-Navigator or saved as a file on the computer.

"Data Storage" (page 4-13)

Configures the settings for storing measured image data in the controller.

Stored image data can be displayed on TM-Navigator or saved as a file on the computer.

"Image Storage" (page 4-19)

No. 0 to 15

The settings for the selected program No. can be checked and changed. (Program No.)

Clicking on the selected program No. changes the color of the button to blue.

Clicking on this button displays the preceding program No.

Clicking on this button displays the following program No.

Edit program name

Clicking on this button displays the [Edit program name] dialog. Set the program name in this

dialog box.

Reference

• Enter up to 16 characters for the program name.

• Letters and numbers can be used for the program name.

Copy Copies the settings* in the currently selected program No. for pasting.

Paste

Pastes the settings* that were copied by using the [Copy] button into the program No. that is

being edited.

Initialization Initializes the settings* in the currently selected program No.

Global initialization Initializes the settings* for all of the program No. 0 to 15.

The currently displayed program

No. is shown.