Owner's manual

5-11
Setting Each Function
Setting Items
- Setup software TM-H1 TM-Navigator User’s Manual -
OUT Settings
For more information about the OUT settings, see "TM-3000 Series User's Manual".
Setting items Description
(1) OUT name This changes the name of the selected OUT setting.
(2) Measurement type This displays the measurement type. Clicking the [Preview] button displays the
setting area.
(3) Measurement conditions This sets the measurement conditions.
(4) Minimum display unit This selects the minimum display unit for the measurement value.
(5) Scaling settings The [Scaling settings] dialog box appears and sets the scaling.
(6) Tolerance settings This sets the upper and lower limits for tolerance.
(7) OUT setting No. This selects the OUT setting No. that you want to configure.
(8) Copy OUT settings This copies the currently selected OUT settings.
The copied OUT settings can be pasted with [Paste OUT settings].
(9) Paste OUT settings This pastes the copied OUT settings into the currently displayed OUT settings.
(1)
(5)
(7)
(6)
(2)
(3)
(4)
(8) (9)