Owner's manual

5-13
Setting Each Function
Setting Items
- Setup software TM-H1 TM-Navigator User’s Manual -
Scaling
The displayed value for the measurement value can be scaled (calibrated) as desired.
 Scaling setting screen
1
When the [Scaling settings] button is clicked, the following setting screen appears.
2
Click the [Acquire measure] button.
The setting values on TM-Navigator are sent to the controller and the measurement value is acquired.
Setting items Description
(1) Acquire measure This acquires the measurement value from the controller. The value is updated
each time this button is clicked.
(2) Measurement value This displays the acquired measurement value.
(3) Trigger input The trigger is input as an external trigger.
(4) MeasureoInput 1 /
MeasureoInput 2
This sets the acquired measurement value as Input value 1 or Input value 2.
(5)
Input value 1 / Input value 2 This sets the input value.
(6) OK This confirms the set contents and closes the window.
(7)
Display value 1 / Display value 2 This sets the display value corresponding to the input value.
(8) Cancel This cancels the set contents and closes the window.
(3)
(1)
(2)
(4) (5) (6) (7) (8)