User guide

ManualsBrandsKEYENCE ManualsLightingXG-7000 Series

*1 Models equipped with the Ethernet port in the CPU unit support Ethernet port direct connection.

*2 When either one is turned ON, at the time of maximum load including the input current.

Main Specifications

Model type

NPN type XG-7701/7702 XG-7501/7502 XG-7001/7002 XG-7001A/7002A

PNP type XG-7701P/7702P XG-7501P/7502P XG-7001P/7002P —————

Pixels

• With CA-HX500C/HX500M connected

5 mega-pixel mode: 2432(H) x 2040(V),

approx. 4.96 mega-pixels

2 mega-pixel mode: 1600(H) x 1200(V),

approx. 1.92 mega-pixels

• With CA-HX200C/HX200M connected

2 mega-pixel mode: 1600(H) x 1200(V),

approx. 1.92 mega-pixels

• With CA-HX048C/HX048M connected

470 k pixel mode: 784(H) x 596(V),

approx. 470,000 pixels

310 k pixel mode: 640(H) x 480(V),

approx. 310,000 pixels

240 k pixel mode: 512(H) x 480(V),

approx. 240,000 pixels

• With XG-H500C/H500M connected

5 mega-pixel mode: 2432(H) x 2050(V),

approx. 4.99 mega-pixels

• With XG-200C/S200C/H200C/200M/

S200M/H200M connected

2 mega-pixel mode: 1600(H) x 1200(V),

approx. 1.92 mega-pixels

1 mega-pixel mode: 1024(H) x 960(V),

approx. 980,000 pixels

• With XG-H100C/H100M connected

1000(H) x 1000(V), 1 mega-pixel

• With XG-035C/S035C/H035C/035M/

S035M/H035M connected

310 k pixel mode: 640(H) x 480(V),

approx. 310,000 pixels

240 k pixel mode: 512(H) x 480(V),

approx. 240,000 pixels

• With CA-HX200C/HX200M connected

2 mega-pixel mode: 1600(H) x 1200(V),

approx. 1.92 mega-pixels

• With CA-HX048C/HX048M connected

470 k pixel mode: 784(H) x 596(V),

approx. 470,000 pixels

310 k pixel mode: 640(H) x 480(V),

approx. 310,000 pixels

240 k pixel mode: 512(H) x 480(V),

approx. 240,000 pixels

• With XG-200C/S200C/H200C/200M/

S200M/H200M connected

2 mega-pixel mode: 1600(H) x 1200(V),

approx. 1.92 mega-pixels

1 mega-pixel mode: 1024(H) x 960(V),

approx. 980,000pixels

• With XG-H100C/H100M connected

1000(H) x 1000(V), 1 mega-pixel

• With XG-035C/S035C/H035C/035M/

S035M/H035M connected

310 k pixel mode: 640(H) x 480(V),

approx. 310,000 pixels

240 k pixel mode: 512(H) x 480(V),

approx. 240,000 pixels

• With CA-HX048C/HX048M connected

470 k pixel mode: 784(H) x 596(V),

approx. 470,000 pixels

310 k pixel mode: 640(H) x 480(V),

approx. 310,000 pixels

240 k pixel mode: 512(H) x 480(V),

approx. 240,000 pixels

• With XG-035C/S035/H035C/035M/

S035M/H035M connected

310 k pixel mode: 640(H) x 480(V),

approx. 310,000 pixels

240 k pixel mode: 512(H) x 480(V),

approx. 240,000 pixels

640(H) x 480(V), approx. 310,000 pixels

Camera

input

Two color/monochrome cameras

(Compatible with

CA-HX500C/HX500M/HX200C/HX200M/

HX048C/HX048M and XG-H500C/200C/

S200C/H200C/H100C/035C/S035C/

H035C/H500M/200M/S200M/H200M/

H100M/035M/S035M/H035M, mixed

connection possible)

Two color/monochrome cameras

(Compatible with

CA-HX200C/HX200M/HX048C/HX048M

and XG-200C/S200C/H200C/H100C/

035C/S035C/H035C/200M/S200M/

H200M/H100M/035M/S035M/H035M,

mixed connection possible)

Two color/monochrome cameras

(CA-HX048C/HX048M and XG-035C/

S035C/H035C/035M/S035M/H035M can

be connected. Mixed connection is

possible.)

Two monochrome cameras (CA-CM20:

KEYENCE or

• XC-HR50/XC-HR57/XC-56/XC-ST50/

XC-ES50/XC-ES51/XC-EI50/XC-EI30/

XC-EU50: Sony

• CS8550Di/CS8570D/CS8560D:

Tosh i b a Ter r y )

Two extra cameras and up to four cameras can be connected by using expansion unit XG-E700. Two extra cameras and up to four cameras

can be connected by using expansion unit

XG-E700A.

Trigger input

4-camera simultaneous capture/individual capture can be selected (when XG-E700 is not connected, images from up to two cameras

can be captured at the same time)

4-camera simultaneous capture/individual

capture can be selected (when XG-E700

is not connected, images from up to two

cameras can be captured at the same

time)

Main image processor DSP (High-speed) DSP DSP (High-speed)

Registered number of inspection settings SD cards 1 and 2 can each hold 1000 programs (depending on the size of the SD card and the size of the programs), external switching possible

Number of registered screens Maximum 1000 screens for each program (depending on SD card size),Image compression also available.

SD card

• SD card slot x 2 (SDHC compatible)

• Compatible with OP-87133 (512MB),

CA-SD1G (1GB: installed standard to

SD1), and CA-SD4G (4GB: SDHC)

• SD card slot x 2 (SDHC compatible)

• Compatible with OP-87133 (512MB: installed standard to SD1), CA-SD1G (1GB), and CA-SD4G

(4GB: SDHC)

Interface

Controlled input (compatible with

arbitrary assignment)

• 20 input (including four high speed designed for trigger input)

• Input rating 26.4 V or lower, 2 mA or grater (3 mA or grater for high speed input terminal)

Controlled output (compatible

with arbitrary assignment)

• 28 output (including four high speed outputs designed for pulse outputting to external device)

• NPN type: NPN open collector Maximum 50 mA (30 V or less) PNP type: PNP open collector 50 mA (30 V or less)

Monitor output Analog RGB output, SVGA 800 x 600 (24 bit color, 60 Hz)

Operation indicators Power, Error LED display

RS-232C Numerical value output and control input/output enabled, maximum baud rate of 115200 bps is supported (Cannot be used with the CA Series Touch Panel)

PLC link

• Numerical value output and control input/output using the RS-232C port or Ethernet port enabled

(Do not use to connect to CC-Link, EtherNet/IP and PROFINET. The RS-232 Port

cannot be used with the CA Series Touch Panel.)

• Following PLCs are supported via link unit:

KEYENCE: KV-700 Series, KV-1000 Series, KV-3000 Series, KV-5000 Series, KV-5500 Series

Mitsubishi Electric: MELSEC A Series (RS-232C only), Q Series, L Series

OMRON: SYSMAC C Series (RS-232C only), CP1/CS1/CJ1/CJ2 Series

YASKAWA Electric: MP900 Series (RS-232C only), MP2000 Series

Ethernet

• Numerical value output, and control input/output enabled.

• By the connection of KEYENCE PC application software, in addition to the function described above, uploading and downloading the inspection settings, simulations, data,

including image data can be sent or received.

• VisionDatabase function support (sold separately)

• For the FTP client function, the VNC server function (for clients other than for PC it will be only for the screen display), and BOOTP function.

• 1000BASE-T/100BASE-TX/10BASE-T

USB

• By the connection of KEYENCE PC application software, in addition to numerical value output and control input/output , uploading and downloading the inspection settings,

simulations, data, including image data can be sent or received

• VisionDatabase function support (sold separately)

•USB2.0

CC-Link

• By connecting the optional CC-Link expansion unit CA-NCL10E, numerical value input/output and control input/output are enabled. (Do not use to connect to PLC Link,

EtherNet/IP and PROFINET.)

• Compatible to the Ver.1.10 remote device station, Ver.2.00 remote device station

EtherNet/IP

Numerical value input/output, and control input/output by using the Ethernet port enabled. (Do not use to connect to PLC Link, CC-Link and PROFINET.)

• Compatible to the cyclic communication (max.1436 byte), and message communication

• Maximum number of connections 32

• Compatible with the conformance test Version.A7

PROFINET

Numerical value input, and control input/output by using the Ethernet port enabled.

• Compatible to the cyclic communication (max. 1408 byte) • Compatible to the aperiodic (recorded data) communication

• Compatible with the Conformance Class A • Do not use to connect to PLC Link, CC-Link and EtherNet/IP.

Console

• By the optional OP-84231, OP-84236 (without silk screen printing), various menu can be used

• Compatible to the operation assignment settings to the console button

• Compatible to the button activation and deactivation of each user group

Touch Panel

• Setting operation from the CA Series touch panel used by the RS-232 port is possible

• For the dedicated touch menu or the operation button (Cannot be used with no protocol communication using the RS-232C or with the PLC Link)

Display language Japanese/English/Simplified Chinese/Traditional Chinese/German selectable

Illumination control By connecting the optional illumination expansion unit CA-DC30E/DC20E/DC21E, LED illumination (12 V, 24 V) and intensity control are enabled.

Rating

Power supply voltage 24 VDC positive and negative to 10%

Current consumption

• 2.4 A (2 Cameras)

• 3.2 A (4 Cameras)

• 2.2 A (2 Cameras)

• 2.8 A (4 Cameras)

• 2.2 A (2 Cameras)

• 2.6 A (4 Cameras)

Environment

al resistance

Ambient temperature

• With two cameras connected: 0 to +50°C

(0 to +45°C with min. 1 mega-pixel camera connected)

• With four cameras connected: 0 to +45°C

0 to +50°C 0 to +50°C (With four cameras connected:

0 to +45°C)

Ambient operating humidity 35 to 85% RH (no condensation)

Weight Approx. 1250 g Approx. 1300 g