entertaining and educational toy
V1.
English Usage Instructions ClicBot App Installation Advice on Using Usage Instructions You can find and download the ClicBot App on the App Store/ Android, or scan the QR code below to download. The Quick Start Guide gives basic instructions on how to control your ClicBot. Please refer to the User Manual for detailed information on the product, including module specifications/ connections, how to charge the battery, security & privacy, after-sale services, and FAQs.
Contents 1.
Specification of Modules Specification of Modules Brain Module The Brain module is the master control and power supply unit of the ClicBot. It uses an ARM-A7 processor and includes a rechargeable polymer lithium battery with a capacity of 1550mAh. The eye of the ClicBot is a 2.1-inch rotational, circular touch screen. It contains a camera & facial recognition software, gesture sensors and camera optics can be found within the upper-left area of the screen.
Specification of Modules Specification of Modules Wheel module Skeleton module The Skeleton module is the ‘bone’ of the ClicBot, and is primarily used for building limbs. There are two connectors at the top and bottom of the Skeleton, and two strip status indicators located on the front, which show the connection and update status in relation to other module pieces.
Specification of Modules Specification of Modules Base Accessory - Mount Reinforcement Accessory - Locker The Mount can be used to fix your ClicBot to a table with Mount Stickers. Dimension Net Weight 75.1*75.1*45.2 mm 61 g Please use the Mount stickers provided by KEYi Tech to ensure the product is fixed properly. 10 Fixation Accessory - Holder The Locker is used to reinforce connections between two modules. Dimension Net Weight 47*36*14.
Specification of Modules Specification of Modules Suction Cup module Smart Foot module The Smart Foot module is a functional sensor module that primarily serves as the ‘feet’ of the ClicBot. The Smart Foot includes a highly-sensitive pressure sensor and a micro-processor to control and measure terminal pressure. Smart foot has a orange indicator. After connecting onto ClicBot, the luminance of the indicator will automatically brighten when pressure is increasing.
Specification of Modules Specification of Modules Distance Sensor module Grasper module The Distance Sensor module is a functional sensor module. It uses a highprecision infrared probe and built-in micro-processor to control and measure the distance from an obstacle. Diameter Net Weight Detection Distance Range Degrees of Freedom Buckle Position 14 40*40*82 mm 53 g 2~100 cm Universal joint on the bottom: 0°~180° Horizontal knob of the main part: -90°~90° Bottom Distance sensor has a red indicator.
Assemble the Modules How to connect modules Modules can be connected at opposite ends & in non-parallel directions. All ClicBot modules can be connected to each other by connectors. A connector contains an A-conn, a B-conn and ‘po-go’ pins. You can connect two modules by interlacing the A-conn and B-conn, and the golden po-go pins transfer instruction and supply power.
Battery Capacity and Charging Connection Internet Connection The battery status of the ClicBot is indicated by different colors on the Brain Module power light. It can also be checked on the system menu. Battery Status Green→Full Power Orange→Low Power Red→No Power When the power is low, an alert will show on the screen. Please charge the battery to ensure normal operations and to maintain battery life.
Connection Security and Privacy Security Information Connection via hotspot is suitable when Wi-Fi is not available or the signal is weak. How to connect to ClicBot App via hotspot: 1. Swipe upwards on the screen of the Brain Module to view the system menu, then select the Device icon , and click “Hotspot Connection” to generate a QR code. 2. Open the ClicBot App, select . Click “Connect to Brain” and then select “Hotspot Connection” to begin scanning. 3.
Safety and Privacy After-Sales Service User Privacy Manufacturer's Name: Beijing Ke Yi Technology Co., Ltd. Address: 8th Floor, Dimeng Building, Huayuan Road, Haidian District, Beijing Product Name: ClicBot modular entertaining and educational toy Trade Mark: ClicBot Model number: KY002CK10 Operating Temperature: -10° C to 40° C This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
FAQs How to turn on/off ClicBot? Long press the power button on the rear side of Brain module for 3 seconds to turn on ClicBot. Press the power button on the rear side of Brain module and then choose the shutdown option to turn off ClicBot, or long press the power button for 4 seconds to force a shutdown. Diagnostics - Auto Shutdown To maintain the battery and motor performance, ClicBot will be shut down automatically in the following situation: 1. It hasn’t been operated over 20 minutes; 2.
