Manualshelf

User manual

ManualsBrandsKEYSIGHT TECHNOLOGIES ManualsLaboratory Test EquipmentDigital 100 MHz 2-channel 1 null 16 null 8 Bit Digital storage (DSO)
131132133134135136137138139140
Oscilloscope Utility Settings 6
Agilent 1000 Series Oscilloscopes User’s Guide 137
To select the USB device port function
The (square) USB device port on the oscilloscope’s back panel can be used
for:
• Connecting to a PictBridge compliant printer.
• Remote programming control of the oscilloscope.
Normally, the USB device port auto- detects the type of host that is
connected. However, if there are auto- detect problems, you can manually
choose the type of host that is (or will be) connected.
To select the USB device port function:
1 In the Preference menu ([Utility]>Preference), press USB Device to toggle
between:
Auto Detect Lets the USB device port auto- detect the type of host
that is connected.
Computer Specifies the that the USB device port will be connected
to a computer host.
PictBridge Specifies the that the USB device port will be connected
to a PictBridge compliant printer host.