User manual

Specifications and Characteristics 7
Agilent 1000 Series Oscilloscopes User’s Guide 143
Characteristics
NOTE
All characteristics are the typical performance values and are not warranted.
Characteristics are valid after a 30-minute warm-up period and ±5 °C from last calibration
temperature.
Table 6 Acquisition System Characteristics
Name Typical Value
Max sample rate: 2 GSa/s half channel
2
, 1 GSa/s each channel
Memory depth: 20 kpts half channel
2
, 10 kpts each channel
Vertical resolution: 8 bits
Peak detection: 4 ns
Averaging: Selectable from 2, 4, 8, 16, 32, 64, 128, or 256
Sequence: Selectable 1 to 800 acquisition frames can be recorded and
played back.
Interpolation: Sin(x)/x
2
Half channel is when only one channel of channel pair 1-2 is turned on, or one channel of channel
pair 3-4 is turned on.
Table 7 Vertical System Characteristics
Name Typical Value
Oscilloscope channels: DSO1xx2A: Ch 1 and 2 simultaneous acquisition
DSO1xx4A: Ch 1, 2, 3, and 4 simultaneous acquisition
Bandwidth (–3dB)
1, 3
: DSO102xA: DC to 200 MHz
DSO101xA: DC to 100 MHz
DSO100xA: DC to 60 MHz
1
20 MHz when vertical scale is set to < 5 mV (1X probe attenuation).
3
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute
warm-up period and ±10° C from firmware calibration temperature.