User manual

Displaying Data 2

Agilent 1000 Series Oscilloscopes User’s Guide 43

Using the Vertical Controls

The vertical controls consist of:

• The channel ([1], [2], [3], and [4]), [Math], and [REF] front panel keys —

turn waveforms on or off (and display or hide their menus).

• The vertical scale knobs — change the amplitude per division setting for

a waveform, using either ground or the center of the screen as a

reference (depending on a preference setting).

• The vertical position knobs — change the vertical position of the

waveform on the screen.

To turn waveforms on or off (channel, math, or reference)

Pressing the channel ([1], [2], [3], and [4]), [Math], and [REF] front panel

keys have the following effect:

• If the waveform is off, the waveform is turned on and its menu is

displayed.

• If the waveform is on and its menu is not displayed, its menu will be

displayed.

• If the waveform is on and its menu is displayed, the waveform is

turned off and its menu goes away.

Figure 16 Vertical Controls

Math REF

Scale knobs

Position knobs