Datasheet

Page 11
Find us at www.keysight.com
1130B-34B InfiniiMax
high-performance active probe
system
– 1.5 to 7 GHz InfiniiMax probe system
– InfiniiMax probe amplifier supports
both differential- and single-ended
measurements for a more cost-
effective solution
– Unrivaled InfiniiMax probing
accessories support browsing,
solder-in, and socketed use models at
the maximum performance available
– Compatible with 3000 X/T-,
4000 X-, 6000 X-, 5000, 6000, and
7000 Series oscilloscopes (except for
6000 Series 100-MHz models)
The InfiniiMax 1130B Series probe
amplifier is a perfect complement to the
InfiniiVision 1 GHz or higher bandwidth
models. Its bandwidth, extremely low
input capacitance (0.32 pF), high common
mode rejection, and patented resistor
probe tip technology provide ultra low
loading of the DUT and superior signal
fidelity. Keysight’s innovative InfiniiMax
1130B Series differential probe is the
easiest-to-use, highest performance
probing system available for high-speed
digital design, and represents a new
industry standard for accuracy, flexibility,
and reliability. Designers can achieve full
system bandwidth in conjunction with
InfiniiVision Series oscilloscopes even
when manually browsing with the probe
or making hands-off measurements.
Optional solder-in probe heads and
solder-in sockets, as well as browser
configuration provide full bandwidth at
the probe tip.
Operating characteristics
Probe bandwidth (–3 dB) 1134B: > 7 GHz
1132B: > 5 GHz
1131B: > 3.5 GHz
1130B: > 1.5 GHz
Rise and fall time (10 to 90%) 1134B: 60 ps
1132B: 86 ps
1131B: 100 ps
1130B: 233 ps
Input capacitance Cm = 0.1 pF Cm is between tips
Cg = 0.34 pF Cg is ground for each tip
Cdiff = 0.27 pF differential mode capacitance = Cm + Cg/2
Cse = 0.44 pF single-ended mode capacitance = Cm + Cg
Input resistance Differential mode resistance = 50 kΩ ± 2%
Single-ended mode resistance = 25 kΩ ± 2%
Input dynamic range ± 2.5 V
Input common mode range ± 6.75 Vdc to 100 Hz; ± 1.25 V > 100 Hz
Maximum signal slew rate 18 V/ns when probing a single-ended signal
30 V/ns when probing a differential signal
DC attenuation 10:1 ± 3% before calibration on oscilloscope
10:1 ± 1% after calibration on oscilloscope
Offset range ± 12.0 V when probing single-ended signal
Maximum input voltage 30 Vpeak, mains isolated
ESD tolerance > 8 kV from 100 pF, 300 Ω HBM
Maximum number of probes
supported by 3000 X/T-/
5000/6000/7000 Series
2
Maximum number of probes
supported by 4000 X- and 6000
X-Series
4
Keysight 1130B InfiniiMax probe offers you the highest performance available for measuring
differential and single-ended signals
InfiniiMax Active Probes and Accessories