Datasheet

Page 14
Find us at www.keysight.com
Characteristics and specifications for N2750A Series InfiniiMode probes
Model number N2750A N2751A N2752A
Probe bandwidth
1
(–3 dB) 1.5 GHz 3.5 GHz 6 GHz
Rise time, probe only (10 to 90%) 233 ps 100 ps 58.3 ps
Input resistance (at DC)
1
200 kΩ ± 2% (differential mode)
100 kΩ ± 2% (single-ended mode)
50 kΩ ± 2% (common mode)
Input capacitance 700 fF (with browser)
Attenuation ratio (at DC) 2:1 / 10:1
Input dynamic range ± 1 V, 2 Vpp (at 2:1) / ± 5 V, 10 Vpp (at 10:1)
Input common mode range ± 15 V (from DC to 100 Hz), ± 2.5 V (for >100 Hz)
3
Offset range ± 15 V
Offset accuracy
2
< 3%
Maximum non-destructive input voltage ± 30 V (DC + peak AC)
Maximum number of probes supported by 3000 X-Series 1
Maximum number of probes supported by 4000 X-, 6000
X-Series
4
1. Denotes warranted electrical specifications at 2:1 attenuation mode after 20 minute warm-up. All others are typical.
2. When calibrated on the oscilloscope, these characteristics are determined by the oscilloscope characteristics.
3. Assumes symmetric differential signals.
For more information about the N2750A Series InfiniiMode probes, refer to the data sheet with the Keysight literature number,
5991-0560EN.
N2750A with browser tip N2750A with socketed tip N2750A with solder-in tip
InfiniiMode Active Probes and Accessories (Continued)