Datasheet

Page 18
Find us at www.keysight.com
High-voltage Differential Active Probes (Continued)
N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz
general-purpose differential probe
The N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz differential probes
provide the superior general-purpose differential signal measurements required for
today’s high-speed power measurements, vehicle bus measurements, and digital system
designs.
The N2792A/N2818A and N2793A/N2819A probes offer a 10:1 attenuation setting, high
input resistance, and low input capacitance to minimize circuit loading.
The N2792A/93A are compatible with any oscilloscope with 50 Ω BNC input. The
probe can be powered by any USB port on a scope or computer, or by a 9 V battery.
The N2818A/19A are the AutoProbe interface versions of the N2792A/93A. They are
compatible with the InfiniiVision 3000 X-, 4000 X- and 6000 X-Series only.
Characteristics for N2792A/N2818A and N2793A/N2819A
differential probes
N2792A/N2818A N2793A/N2819A
Bandwidth 200 MHz 800 MHz
Risetime 1.75 ns 437 ps
Attenuation ratio 10:1 10:1
CMRR —80 dB at 50/60 Hz
—50 dB at 10 MHz
—60 dB at 50/60 Hz
—15 dB at 500 MHz
Input impedance (between inputs) 1 MΩ // 3.5 pF 200 kΩ // 1 pF
Max input voltage to ground ± 60 V ± 40 V
Max input voltage between two inputs ± 20 V ± 15 V
Max number of probes supported by
InfiniiVision Series
4 4
Ordering information for Keysight high voltage differential probes,
power supplies and accessories
N2790A 100-MHz, 1.4 kV differential probe with AutoProbe interface
N2791A 25-MHz, 700-V differential probe
N2792A 200-MHz, 20-V differential probe
N2818A 200-MHz, 20-V differential probe with AutoProbe interface
N2793A 800-MHz, 15-V differential probe
N2819A 800-MHz, 15-V differential probe with AutoProbe interface
N2891A 70-MHz, 7,000-V differential probe
N4853A Variable pitch browser for N2793A/N2819A, qty 2
N4854A DC blocking capacitor for N2793A/N2819A, qty 2
N2804A 300 MHz high voltage differential probe
N2805A 200 MHz high voltage differential probe with extended cable length
N2816A Probe tip accessory kit for N2804A including 2 alligator clips, 2 pincer clips, and
2 extension leads (30 cm)
N2817A Probe tip accessory kit for N2805A including 2 alligator clips, 2 hook clips, 2 pincer
clips, and 2 browser tips
N7013A Extreme temperature extension cable kit for N2790A, N2791A, N2792A, and N2818A
N2790A 100-MHz, 1.4-kV differential probe
with AutoProbe interface
N2791A 25-MHz, 700-V differential probe
N2792A 200-MHz, 20-V differential probe
N2793A 800-MHz, 15-V differential probe