Datasheet

Page 33
Find us at www.keysight.com
T2A Probe Interface Adapter
– Enables Tektronix TekProbe-BNC
level 2 probes to connect to
Keysight’s AutoProbe interface
on InfiniiVision 3000 X-, 4000 X-,
6000 X-, 5000, 6000, and 7000
oscilloscopes
– An easy-to-use plug-on adapter
to the Keysight oscilloscope’s
AutoProbe interface
– Provides necessary probe power,
calibration, and offset control as
needed to the attached TekProbe
probe
The N2744A T2A interface adapter
enables selected TekProbe interface
level 2 probes to be used with Keysight
oscilloscopes with the AutoProbe
interface. Existing TekProbe-BNC probe
types can simply be plugged into the T2A
adapter, which is then plugged directly
into any AutoProbe input channel on an
InfiniiVision or Infiniium oscilloscope.
Select the probe model in the scope
menu and the Keysight oscilloscope sets
up the attenuation factor and the probe
type automatically. The T2A interface
adapter supplies the necessary probe
power, calibration (for selected models
only), and offset control as used by the
connected TekProbe probe. The adapter
is targeted for customers using both Tek
active probes with TekProbe-BNC level
2 interfaces and Keysight oscilloscopes
with the AutoProbe interface.
Tek probe compatibility
The N2744A T2A adapter supports
only the probes listed with TekProbe
interfaces.
AC/DC current probe
TCP202 50-MHz AC/DC current probe
Single-ended active probes
P6243 Single-ended active probe, 1 GHz,
10:1 without offset control
P6245 Single-ended active probe,
1.5 GHz, 10:1 with offset control
P6205 Single-ended active probe,
750 MHz, 10:1 without offset
control
P6241 Single-ended active probe, 4 GHz,
10:1 with offset control
P6249 Single-ended active probe, 4 GHz,
5:1 with offset control
Optical-to-Electrical Converters
(works with InfiniiVision 5000,
6000 and 7000 with version
6.16 software only)
P6701B 1 GHz optical-to-electrical
converter with FC/PC connector
P6703B 1.2 GHz optical-to-electrical
converter with FC/PC connector
P6711 250 MHz optical-to-electrical
converter
P6713 300 MHz optical-to-electrical
converter
Differential active probes
P5205 or
P5205A
Differential probe, 100 MHz,
50:1/500:1 with offset control
P5210 or
P5210A
Differential probe, 50 MHz,
100:1/1000:1 with offset control
P6246 400 MHz, 10:1/1:1 with offset
control
P6247 1 GHz, 10:1/1:1 with offset control
P6248 1.5 GHz, 10:1/1:1 with offset
control
P6250 500 MHz, 50:1/5:1 with offset
control
P6251 1 GHz, 50:1/5:1 with offset control
Keysight scope compatibility
– Keysight InfiniiVision 6000 X-Series
with software version 6.00 or higher
– Keysight InfiniiVision 3000 X-/4000
X-Series with software version 1.10
or higher
– Keysight InfiniiVision 5000, 6000,
and 7000 Series and future revisions
(except 6000 100-MHz) with
software version 06.16 or higher
Ordering information
N2744A T2A probe interface adapter