Keysight Technologies InfiniiVision Oscilloscope Probes and Accessories For 2000 X-, 3000 X-, 4000 X-, 6000 X-, 5000, 6000, and 7000 Series Selection Guide Data Sheet
02 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet To achieve the best results from your scope, you need the right probes and accessories for your particular application. That’s why Keysight Technologies, Inc. offers a complete family of innovative probes and accessories for InfiniiVision oscilloscopes. For the most up-to-date and complete information about Keysight’s accessories, please visit our Web site at: www.keysight.
03 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Probe Compatibility Table For ordering information when replacing your probe or probe accessory: Refer directly to the page number listed in the table of contents for your probe model.
04 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Probe Compatibility Table (continued) Probe type Probe model DSO5000A 100 MHz DSO5000A 300 - 500 MHz MSO/DSO6000A4 100 MHz Passive probes, page 5 N2863B 10:1 300 MHz (included in 5000 Series 100/300 MHz) 10070D 1:1 20 MHz Recommended Recommended Recommended MSO/DSO6000A4 300 MHz - 1 GHz MSO/DSO7000A/B 100 MHz - 1 GHz Compatible Recommended Recommended Recommended Recommended 10073D 10:1 500 MHz (included in 6000/7
05 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Passive Probes – Designed for optimal performance with your Keysight InfiniiVision Series oscilloscopes – 1:1 and 10:1 attenuation – 20 to 500 MHz Rugged, high-quality probes at a reasonable price Keysight 10070-family passive probes are a great choice if you’re looking for high quality at a very reasonable price.
06 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Passive Probes (continued) Ordering information for Keysight passive probes 10070D 1:1 20 MHz passive probe N2862B 10:1 150 MHz passive probe 10074D 10:1 150 MHz passive probe N2863B N2889A 10:1 300 MHz passive probe 10:1/1:1 350 MHz passive probe 10073D N2890A N2873A 10:1 500 MHz passive probe 10:1 500 MHz passive probe 10:1 500 MHz miniature passive probe 10:1 700 MHz miniature passive probe N2894A N2862B/63B passiv
07 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet High-voltage Passive Probes – Ideal for measuring up to 30 kV – Up to 500 MHz bandwidth – 100:1 or 1000:1 attenuation 10076C high-voltage probe The Keysight 10076C 4 kV 100:1 passive probe gives you the voltage and bandwidth you need for making high-voltage measurements.
08 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet InfiniiMax Active Probes and Accessories 1130A-34A InfiniiMax high-performance active probe system – 1.
09 | Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet InfiniiMax Active Probes and Accessories (continued) 1130A-34A InfiniiMax high-performance active probe system Ordering information for Keysight InfiniiMax 1130A probe and accessories Probe amplifier 1130A 1.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet InfiniiMode Active Probes and Accessories N2750A-52A InfiniiMode probe – 1.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet InfiniiMode Active Probes and Accessories (continued) Characteristics and specifications for N2750A Series InfiniiMode probes Model number N2750A N2751A N2752A Probe bandwidth* (–3 dB) 1.5 GHz 3.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet High-voltage Differential Active Probes – 25 to 800 MHz bandwidth – Switchable attenuation – Measure up to 1,400 V CAT II and 7 kV CAT I N2790A/91A and N2891A high voltage differential probes Oscilloscope users often need to make floating measurements where neither point of the measurement is at earth ground.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet High-voltage Differential Active Probes (continued) N2804A/N2805A high-voltage high-speed differential probes The N2804A and N2805A differential probes provide the superior general-purpose differential signal measurements that are required for high-speed power measurements such as measuring characteristics of switching power devices, DC-DC converters or class D amplifiers, vehicle bus measurements, and high-speed digital system
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet High-voltage Differential Active Probes (continued) N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz general-purpose differential probe The N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz differential probes provide the superior general-purpose differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements, and digital system designs.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Single-ended Active Probes N2795A/96A/97A low-cost single-ended active voltage – High resistance (1MΩ) and low capacitance (1 pF) input for low loading – Wide input dynamic range (±8 V) and offset range (±12 V for N2796A/97A, ±8 V for N2795A) – Built-in headlight – Direct connection to AutoProbe interface (no power supply required) – N2797A for extreme temperature environmental chamber testing at –40 to +85 °C The N2795A/96A ar
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Single-ended Active Probes (continued) N7020A power rail probe – 2-GHz single-ended active probe for power rail noise measurement – 1:1 attenuation ratio ensures low noise signal measurement – ±24V of probe offset range enables effective elimination of DC component of a power supply.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Mixed Signal Oscilloscope Logic Probes – Compatible with all 40-pin logic probe – Flying leads offer flexibility and convenience MSO probes offer great value and performance These logic probes for the InfiniiVision mixed signal oscilloscopes (MSOs) are the same ones used with Keysight industryleading high-performance logic analyzers.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Mixed Signal Oscilloscope Logic Probes (continued) The InfiniiVision MSO digital channels were architected to be compatible with a wide variety of probing accessories developed over 20 years for logic analyzers. There’s a good chance that the logic analyzer accessories you already own work with your MSO.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Clamp-on Current Probes – Up to 100 MHz bandwidth and 500 Arms current – Hybrid technology to measure ac and dc – Compatible with 1 MΩ scope input Accurate current measurements without breaking the circuit Compatible with any scope or voltage measuring instruments with BNC input, the 1146B and N2780B Series current probes offer accurate and reliable solutions for measuring dc and ac currents.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Clamp-on Current Probes (continued) Characteristics of the 1146B current probe Bandwidth* dc to 100 kHz (–3 dB) Current range* 100 mV/A:100 mA to 10 A peak 10 mV/A:1 to 100 A peak 1000 mV peak max Output signal AC current accuracy* Range 100 mV/A (50 mA to 10 A peak) Accuracy 3% of reading ±50 mA Range 10 mV/A (500 mA to 40 A peak) Accuracy 4% of reading ±50 mA Range 10 mV/A (40 A to 100 A peak) Accuracy (40 A to 100 A peak
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet High-Sensitivity Current Probes – Measure AC/DC currents as low as 50 uA – Ideal for capturing and analyzing low level current flow in the DUT to characterize sub-circuits or measure current consumption of batterypowered devices or integrated circuits – Simultaneous high- and low-gain views of the current waveform for more precise wide dynamic range measurement (with N2820A) As modern battery-powered devices and integrated circu
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet High-Sensitivity Current Probes (continued) Probe characteristics and specification Bandwidth (–3 dB) Zoom-out channel: DC to 3 MHz Zoom-in channel: DC to 500 kHz Risetime (Tr = 0.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Wedge Probe Adapters Easy connection to surface mount ICs Safe, with no chance of shorting Mechanically non-invasive contact 3-, 8-, and 16-signal versions Supports 0.5 and 0.65‑mm TQFP and PQFP packages Problem-free probing The Keysight wedge probe adapter eliminates many of the frustrations associated with probing surface mount components.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Miscellaneous Accessories Testmobile The sturdy Keysight 1180CZ Testmobile for use with 6000 Series oscilloscopes makes sharing your scope easy. Its large wheels make it easy to roll from place to place. For use with the Keysight 6000 Series scope, the 1180CZ Testmobile scope cart with the N2919A bracket provides convenient mobility and secure mounting of your scope.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Miscellaneous Accessories (continued) Probe positioners – Easy-to-manipulate probe arms for hands-free browsing – One- or two-articulated arms with stable high-mass base (N2784A and N2785A) – Quick and stable XY positioning (N2786A) – Stable 3D probe positioning for hard-to-reach XYZ access (N2787A) – Compatible with most scope probes – Applications: Hands-free browsing for electronic components on PC board Ordering information
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet N2744A T2A Probe Interface Adapter – Enables Tektronix ® TekProbe-BNC® level 2 probes to connect to Keysight’s AutoProbe interface on InfiniiVision 3000 X-, 4000 X-, 6000 X-, 5000, 6000, and 7000 oscilloscopes – An easy-to-use plug-on adapter to the Keysight oscilloscope’s AutoProbe interface – Provides necessary probe power, calibration, and offset control as needed to the attached TekProbe probe The N2744A T2A interface adapte
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Recommended Probes for Low-/Mid-Speed Bus Measurements Applications Speed and signal type Recommended probe Required probe bandwidth LIN 10 kHz, single-ended SE passive > 100 MHz ARINC 425 CAN 1000 kbps, differential 1 Mbps, differential N2792A/N2818A N2792A/N2818A 200 MHz 200 MHz MIL-STD 1553 1 Mbps, differential ±25 Vpp ~2.
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet Keysight Oscilloscopes Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications
| Keysight | InfiniiVision Oscilloscope Probes and Accessories - Data Sheet www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus www.axiestandard.
