Datasheet

15
Specications
Waveform characteristics, continued
Square & pulse
Frequency range 1 µHz to 20 MHz or 30 MHz, 1 µHz resolution
Rise and fall times (nom) Square: 8.4 ns, fixed
Pulse: 8.4 ns to 1 µs, independently variable, 100-ps or 3-digit resolution
Overshoot (typ) < 2%
Duty cycle 0.01% to 99.99%
8
Pulse width 16 ns minimum, 100-ps resolution
Jitter (cycle-to-cycle, typ) < 40 ps rms
Ramp & triangle
Frequency range 1 µHz to 200 kHz, 1 µHz resolution
Ramp symmetry 0.0% to 100.0%, 0.1% resolution
(0% is negative ramp, 100% is positive ramp, 50% is Triangle)
Nonlinearity (typ) < 0.05% from 5% to 95% of the signal amplitude
Gaussian noise
Bandwidth (typ) 1 mHz to 20 MHz or 30 MHz, variable
Crest factor (nom) 4.6
Repetition period > 50 years
Pseudorandom binary sequence (PRBS)
Bit rate 1 mbps to 50 Mbps, 1 mbps resolution
Sequence length 2
m
-1, m=7, 9, 11, 15, 20, 23
Rise and fall times (nom) 8.4 ns to 1 µs, variable, 100-ps or 3-digit resolution
Arbitrary waveform characteristics
IQ Player Characteristics
General
Waveform length 8 Sa to 1 MSa per channel (16 MSa with Option OCX) in increments of 1 sample
Sample rate 1 µSa/s to 250 MSa/s, 1 µSa/s resolution
Voltage resolution 16 bits
Bandwidth (-3 dB, nom) Filter Off: 40 MHz
“Normal” Filter On: 0.27 x (Sample Rate)
“Step” Filter On: 0.13 x (Sample Rate)
Rise and fall time 0.35 / Bandwidth (10 ns min) with "Normal" or "Step" filter On
Settling time (typ) < 200 ns to 0.5% of final value
Jitter (typ) Filter Off: < 40 ps rms
“Normal” or “Step” filter On: < 5 ps
Balance Adjust
Amplitude Gain
(channel to channel amplitude balance)
-30% to +30%
Delta Offset Ch 1 and Ch 2 ± (5 VDC - Peak AC) into 50 Ω
± (10 VDC - Peak AC) into open circuit
IQ Signal Skew
(adjusts channel to channel skew)
-4.00 ns to +4.00 ns
Views
Amplitude vs. Time
X-Y (constellation diagram)