Datasheet
06 | Keysight | AC6800B Series Basic AC Power Sources - Data Sheet
1.61
3.22
6.45
12.90
3.2
6.4
12.9
25.8
155
310
2.5
5.0
10.0
20.0
200
100
5
10
20
40
High voltage range
Low voltage range
AC6801B (500 VA)
AC6802B (1000 VA)
AC6803B (2000 VA)
AC6804B (4000 VA)
Current (Arms)
Voltage
(Vrms )
AC characteristic
0.91
1.82
3.65
7.30
2.0
4.0
8.0
16.0
200
438
1.8
3.6
7.3
14.6
219
100
4
8
16
32
High voltage range
AC6801B (400 W)
AC6802B (800 W)
AC6803B (1600 W)
AC6804B (3200 W)
Low voltage range
Current (Arms)
Voltage
(Vrms )
DC characteristic
AC6800B steady-state AC output characteristic AC6800B steady-state DC output characteristic
Specifications
Model AC6801B AC6802B AC6803B AC6804B
Output ratings for AC mode (155 V/310 V range)
Rated voltage range 1 to 155 Vrms/2 to 310 Vrms
Voltage setting accuracy
1
0.35% of full scale
Output phases Single
Maximum rms current
2
5 A/2.5 A 10 A/2.5 A 20 A/10 A 40 A/20 A
Load power factor capability 0 to 1 (leading or lagging)
Maximum power 500 VA 1 kVA 2 kVA 4 kVA
Frequency setting range 40 to 500 Hz
Frequency accuracy ±0.02%
Output ratings for DC mode (155 V/310 V range)
Rated voltage range 1.4 to 219 V/2.8 to 438 V
Voltage setting accuracy
3
0.3% of full scale/0.25% of full scale
Maximum rms current
4
4 A/2 A 8 A/4 A 16 A/8 A 32 A/16 A
Maximum power 400 W 800 W 1600 W 3200 W
1. For an output voltage of 13.5 to 155 V/27 to 310 V, an output frequency of 45 Hz to 65 Hz, no load, and 23 ±5 °C
2. For an output voltage of 1 to 100 V/2 to 200 V. Limited by the output power when the output voltage is 100 to 155 V/200 to 310 V
3. For an output voltage of 19 to 219 V/38 to 438 V, no load, and 23 ±5 °C
4. For an output voltage of 1.4 to 100 V/2.8 to 200 V. Limited by the output power when the output voltage is 100 to 219 V/200 to 438 V
Definitions
Specifications
Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40 °C after a 30-minute warm-up
period. Specifications apply at the output terminals. Accuracy specifications are warranted for three years.
Supplemental characteristics/typical values
Supplemental characteristics are not warranted but are descriptions of performance determined either by design or by type testing.
All supplemental characteristics are typical unless otherwise noted.