Datasheet

Page 14
Find us at www.keysight.com
Input/output specifications
Digital I/O Connector type DSUB female 9 pins
Input/output pins DIO 7 pins, +5V, GND
Absolute max input voltage 5.25 V
Absolute min input voltage –0.25 V
Max logic L input voltage 0.8 V, Pull-up to 5 V by 5 kΩ
Min logic H input voltage 2.0 V, Pull-up to 5 V by 5 kΩ
Max source current 1 mA @ Vo = 0 V
Max sink current 50 mA @ Vo = 5 V
5 V power supply pin Limited to 500 mA, resettable fuse protected
Conputer interfaces
LXI (Rev. 1.4) 10/100Base-T Ethernet (Sockets, VXI-11 protocol, HiSLIP, and Web user interface)
USB USB 2.0 (USB-TMC488 and MTP)
USB host controller on the front, USB device interface on the rear
Easy File Access
GP-IB IEEE-488.2
Program, software and drivers
Programming SCPI
Program memory 100 kB (1000 lines with 100 characters/line)
LXI compliance LXI Core 2011
Software available Quick I/V Measurement Software, Graphical Web Interface
Drivers available IVI-C, IVI-COM drivers, LabVIEW drivers
Environmental specifications
Environment For use in indoor facilities without air conditioning
Operating 0°C to 45°C (0°C to 35°C when charging battery), 30% to 80% non-condensing
Storage –20°C to 60°C, 10% to 90% non-condensing
Altitude Operating: 0 m to 2000 m, Storage: 0 m to 4600 m
Power supply 90 V to 264 V, 47 Hz to 63 Hz, 80 VA maximum
EMC IEC61326-1/EN61326-1, AS/NZS CISPR 11, KC: RRA Notification amending Radio Waves Act Article 58-2
Safety IEC61010-1/EN61010-1, CAN/CSA-C22.2 No. 61010-1-12, C/US
Certifications CE, cCSAus, RCM, KC
Warm-up 1 hour
Dimensions Case 88 mm (2U) x 213 mm (half width) x 348 mm
Working 104 mm x 261 mm x 374 mm (with bumper)
Weight Net 4.3 kg (B2981A), 4.9 kg (B2983A), 4.5 kg (B2985A), 5.1 kg (B2987A)
Shipping 8.5 kg (B2981A), 9.0 kg (B2983A), 8.7 kg (B2985A), 9.2 kg (B2987A)