Datasheet

Find us at www.keysight.com Page 17
Performance characteristics (continued)
Waveform math
All Models
Math functions
Add, subtract, multiply, divide, FFT (magnitude), FFT (phase), low-pass filter
Record size
Up to 64 k points resolution
FFT
Window types: Hanning, Flat top, Rectangular, Blackman-Harris
Vertical scaling: dB (logarithmic) or RMS (linear)
Horizontal scaling: User-defined span and center frequency settings, or Auto Setup
Digital voltmeter (standard)
All Models
Functions
DC, AC-rms, DC-rms
Resolution
3 digits
Measuring rate
100 times/second
Auto ranging
Automatic adjustment of vertical amplification to maximize the dynamic range of measurements
Range meter
Graphical display of most recent measurement, plus extrema over the previous 3 seconds
Frequency counter (standard)
All Models
Functions
Frequency
Resolution
5 digits
Measuring rate
100 times/second
Auto ranging
Automatic adjustment of vertical amplification to maximize the dynamic range of measurements
Range meter
Graphical display of most recent measurement, plus extrema over the previous 3 seconds
Frequency response analysis - Bode plot (standard on “G” models)
EDUX1052G/ DSOX1202G/ DSOX1204G
Dynamic range
> 80 dB (typical, based on 0 dBm (630 mVpp) input into 50-Ω load
Input test source
WaveGen out
V
IN
and V
OUT
Channel 1, 2, 3, and 4 (channel 3 and 4 on 4-channel models only)
Frequency range
10 Hz to 20 MHz
Number of test points
1 to 1000 points across selected frequency range
Test amplitude
1 mVpp to 9 Vpp into 50-Ω
Test results
Overlaid logarithmic gain (dB) and linear phase (degrees) plots versus logarithmic frequency
Manual measurements
A single pair of tracking gain and phase markers at user-defined frequency setting
Plot scaling
Auto-scaled during test with user-defined scaling after test