Datasheet

Find us at www.keysight.com Page 18
Performance characteristics (continued)
WaveGen Built-in function generator (standard onG” models)
Note: Only available on WaveGen models EDUX1052G, DSOX1202G, and DSOX1204G. WaveGen is not upgradeable.
EDUX1052G/ DSOX1202G/ DSOX1204G
WaveGen out
Front-panel BNC connector
Waveforms
Sine, square, ramp, pulse, DC, noise
Modulation
Modulation types: AM, FM, FSK
Carrier waveforms: Sine, ramp
Modulation source: Internal (no external modulation capability)
AM:
Modulation: sine, square, ramp
Modulation frequency: 1 Hz to 20 kHz
Depth: 0 to 100%
FM:
Modulation: sine, square, ramp
Modulation frequency: 1 Hz to 20 kHz
Minimum carrier frequency: 10 Hz
Deviation: 1 Hz to carrier frequency or (2e12 / carrier frequency), whichever is smaller
FSK:
Modulation: 50% duty cycle square wave
FSK rate: 1 Hz to 20 kHz
Hop frequency: 2 x FSK rate to 10 MHz
Sine
Frequency range: 0.1 Hz to 20 MHz
Amplitude flatness: ± 0.5 dB (relative to 1 kHz)
Harmonic distortion: 40 dBc
Spurious (non-harmonics): 40 dBc
Total harmonic distortion: 1%
SNR (50 Ω load, 500 MHz bandwidth): 40 dB (typical); 30 dB (min)
Square wave /pulse
Frequency range: 0.1 Hz to 10 MHz
Duty cycle: 20 to 80%
Duty cycle resolution: Larger of 1% or 10 ns
Pulse width: 20 ns minimum
Rise/fall time: 18 ns (10 to 90%)
Pulse width resolution: 10 ns or 5 digits, whichever is larger
Overshoot: < 2%
Asymmetry (at 50% DC): ± 1% ± 5 ns
Jitter (TIE RMS): 500 ps
Ramp /triangle wave
Frequency range: 0.1 Hz to 200 kHz
Linearity: 1%
Variable symmetry: 0 to 100%
Symmetry resolution: 1%
Noise
Bandwidth: 20 MHz typical