Datasheet

Find us at www.keysight.com Page 19
Performance characteristics (continued)
WaveGen – Built-in function generator (continued)
Note: Only available on WaveGen models EDUX1052G, DSOX1202G, and DSOX1204G. WaveGen is not upgradeable.
EDUX1052G/ DSOX1202G/ DSOX1204G
Frequency
Sine wave and ramp accuracy:
130 ppm (frequency < 10 kHz)
50 ppm (frequency > 10 kHz)
Square wave and pulse accuracy:
[50 + frequency/200] ppm (frequency < 25 kHz)
50 ppm (frequency ≥ 25 kHz)
Resolution: 0.1 Hz or 4 digits, whichever is larger
Amplitude
Square, Pulse, Ramp:
2 mVpp to 20 Vpp into Hi-Z (offset ≤ ±0.4 V)
1 mVpp to 10 Vpp into 50 Ω (offset ≤ ±0.4 V)
50 mVpp to 20 Vpp into Hi-Z (offset > ±0.4 V)
25 mVpp to 10 Vpp into 50 Ω (offset > ±0.4 V)
Sine:
2 mVpp to 12 Vpp into Hi-Z (offset ≤ ± 0.4 V)
1 mVpp to 9 Vpp into 50 Ω (offset ≤ ± 0.4 V)
50 mVpp to 12 Vpp into Hi-Z (offset > ± 0.4 V)
25 mVpp to 9 Vpp into 50 Ω (offset > ± 0.4 V)
Resolution: ≤ 1% of the amplitude
Accuracy: 2% (Frequency = 1 kHz)
DC offset
Square, Pulse, Ramp:
± [10 V – ½ amplitude] into Hi-Z
± [5 V – ½ amplitude] into 50 Ω
Sine:
± [8 V – ½ amplitude] into Hi-Z
± [4.5 V – ½ amplitude] into 50 Ω
Resolution: Larger of 100 µV or 3 digits
Accuracy: ± 1.5% of offset setting ± 1.5% of amplitude ± 1 mV
Main output
Impedance: 50 Ω typical
Isolation: Not available, main output BNC is grounded
Protection: Overload automatically disables output
Sine, square, ramp, pulse, DC, noise