Datasheet

23 | Keysight | InniiVision Oscilloscope Probes and Accessories - Data Sheet
Wedge Probe Adapters
Easy connection to surface
mount ICs
Safe, with no chance of shorting
Mechanically non-invasive contact
3-, 8-, and 16-signal versions
Supports 0.5 and 0.65-mm
TQFP and PQFP packages
Problem-free probing
The Keysight wedge probe adapter
eliminates many of the frustrations
associated with probing surface mount
components. If you’ve ever accidentally
shorted IC pins together, experienced
electrical and/or mechanical problems
with soldering small wires onto leads, or
gotten frustrated juggling multiple probes
while you’re trying to operate your scope,
the Wedge was designed with you in mind.
Make the inaccessible accessible
When you use the Wedge, you don’t have
to worry about shorting IC pins together
on a delicate component–or worse yet on
an irreplaceable prototype. The Wedge
is easy to insert and it stays put. There’s
no need to solder small wires onto leads.
The Wedge is mechanically non-invasive,
so you won’t damage the legs of the IC.
Instead, you’ll have easy access to
hard-to-reach components.
Electrical reliability
The Wedge makes two contact points with
each leg of the IC. This redundant physical
connection increases the electrical
reliability of the connection. And the
Wedge’s low capacitance and inductance
provides superior performance to many
other alternatives.
The wedge probe adapter connects
directly to 1145A/1155A active probes
and the dual lead adapter provided with
the 1160A-65A passive probe family and
N2877A/N2879A accessory kits for use
with N287xA Series passive probes.
IC clip kits
An inexpensive solution for probing
ne-pitch ICs, the 10072A SMT Kit
includes 10 IC clips and 2 dual-lead
adapters that connect the clips directly to
10070-family probes.
The 10075A 0.5-mm IC clip kit is ideal
for connecting to IC’s as ne as 0.5 mm.
The clip body allows many clips to be
mounted side-by-side. The kit includes
four 0.5-mm IC clips and two dual-lead
adapters that connect the IC clips directly
to 10070-family probes.
Keysight Wedge electrical
characteristics
Operating
voltage
< 40 Vdc + peak ac
Operating
current
0.5 A maximum
Capacitance
between
contacts
2 pF typical (all except
Keysight-E2643A/44A)
4.33 pF typical at 1 MHz
(Keysight-E2643A/44A)
Self-
inductance
15 nH typical (all except Keysight
E2643A/44A)
37 nH typical at 1 MHz
(Keysight E2642A/44A)
Cross
coupling
–31 dB typical at 100 MHz
(Keysight E2643A/44A)
Contact
resistance
< 0.1 Ω
E2613A 0.5 mm Wedge probe adapter,
3 signal, qty 1
E2614A 0.5 mm Wedge probe adapter,
8 signal, qty 1
E2643A 0.5 mm Wedge probe adapter,
16 signal, qty 1
E2615A 0.65 mm Wedge probe adapter,
3 signal, qty 1
E2616A 0.65 mm Wedge probe adapter,
8 signal, qty 1
E2644A 0.65 mm Wedge probe adapter,
16 signal, qty 1
10072A SMT kit for 10070 probe family
10075A 0.5 mm IC clip kit
Ordering information