Datasheet

25 | Keysight | InniiVision Oscilloscope Probes and Accessories - Data Sheet
Product number Description
N2784A
1
1-arm probe positioner
N2785A
1
2-arm probe positioner
N2786A 2-leg probe positioner
N2787A 3D probe positioner
Ordering information
Miscellaneous Accessories (continued)
Probe positioners
– Easy-to-manipulate probe arms for
hands-free browsing
– One- or two-articulated arms with
stable high-mass base (N2784A and
N2785A)
– Quick and stable XY positioning
(N2786A)
– Stable 3D probe positioning for
hard-to-reach XYZ access (N2787A)
– Compatible with most scope probes
– Applications: Hands-free browsing for
electronic components on PC board
The N2784A and N2785A probe
positioners provide quick and stable X-Y
positioning for PC boards and devices that
require hands-free probing.
Unlike other probe positioners that require
multiple adjustments to lock the probe
holder into position, the N2784A and
N2785A need only the “lift and drop”
motion to put the probe in place. The
weight stabilization technique used in
these probe holders keeps constant
pressure at the probing point so the probe
tip stays in position even when the target
board is bumped.
The N2786A is a low cost, easy-to-use
XY axis probe holder for general purpose
probing appliactions. The two-leffed
positioner is designed to be easy to use–
the positioner itself has no controls to
positioner it in place.
The N2787A is a 3D probe positioner with
a exible, articulating arm that can be
quickly positioned in a variety of
congurations.
For more information about Keysight’s
probe positioners, refer to literature
number 5989-9131EN.
1. Includes 3x magnifying glass, arm strap, cable
tie, probe rest, and manual.
N2784A one-arm probe positioner
N2786A 2-leg probe positioner
N2787A 3D probe positioner