Datasheet

26 | Keysight | InniiVision Oscilloscope Probes and Accessories - Data Sheet
N2744A T2A Probe Interface Adapter
– Enables Tektronix
®
TekProbe-BNC
®
level 2 probes to connect to Keysight’s
AutoProbe interface on InniiVision
3000 X-, 4000 X-, 6000 X-, 5000,
6000, and 7000 oscilloscopes
– An easy-to-use plug-on adapter to
the Keysight oscilloscope’s AutoProbe
interface
– Provides necessary probe power,
calibration, and offset control as
needed to the attached TekProbe
probe
The N2744A T2A interface adapter
enables selected TekProbe® interface
level 2 probes to be used with Keysight
oscilloscopes with AutoProbe interface.
Existing TekProbe-BNC probe types can
simply be plugged into the T2A adapter
which is then plugged directly into any
AutoProbe input channel on an InniiVision
or Inniium oscilloscope. Select the probe
model in the scope menu and the Keysight
oscilloscope sets up the attenuation factor
and the probe type automatically. The T2A
interface adapter supplies the necessary
probe power, calibration (for selected
models only) and offset control as used by
the connected TekProbe probe. The
adapter is targeted for customers using
both Tek active probes with TekProbe-BNC
level 2 interfaces and Keysight
oscilloscopes with the AutoProbe
interface.
Tek probe compatibility
The N2744A T2A adapter supports only
the probes listed below with TekProbe
interfaces.
TCP202 50-MHz AC/DC current probe
P6243 Single-ended active probe, 1
GHz, 10:1 without offset control
P6245 Single-ended active probe,
1.5 GHz, 10:1 with offset control
P6205 Single-ended active probe, 750
MHz, 10:1 without offset control
P6241 Single-ended active probe,
4 GHz, 10:1 with offset control
P6249 Single-ended active probe,
4 GHz, 5:1 with offset control
P6701B 1 GHz Optical-to-electrical
converter with FC/PC connector
P6703B 1.2 GHz Optical-to-electrical
converter with FC/PC connector
P6711 250 MHz Optical-to-electrical
converter
P6713 300 MHz Optical-to-electrical
converter
P5205 or
P5205A
Differential probe, 100 MHz,
50:1/500:1 with offset control
P5210 or
P5210A
Differential probe, 50 MHz,
100:1/1000:1 with offset control
P6246 400 MHz, 10:1/1:1 with offset
control
P6247 1 GHz, 10:1/1:1 with offset control
P6248 1.5 GHz, 10:1/1:1 with offset control
P6250 500 MHz, 50:1/5:1 with offset
control
P6251 1 GHz, 50:1/5:1 with offset control
AC/DC current probe
Single-ended active probes
Differential active probes
Keysight scope compatibility
– Keysight InniiVision 6000 X-Series
with sofware version 6.00 or higher
– Keysight InniiVision 3000 X-/4000
X-Series with software version 1.10 or
higher
– Keysight InniiVision 5000, 6000,
and 7000 Series and future revisions
(except 6000 100-MHz) with software
version 06.16 or higher
Optical-to-Electrical Converters
(works with InniiVision 5000,
6000 and 7000 with version 6.16
software only)
N2744A T2A probe interface adapter
Ordering information