DATA SHEE T N6700 Modular Power System Family Low-Profile MPS Mainframes N6700C–N6702C, N6710C–N6712C DC Power Modules N6731B–N6786A Electronic Load Modules N6791A-N6792A NEW
Small Size and Flexibility for ATE –– Ideal for ATE systems in R&D, design validation, and manufacturing –– Small size: up to four outputs in 1U of rack space –– Flexible, modular system: Lets you mix and match power levels and performance levels to optimize your investment –– Performance modules for critical test requirements –– Value modules for basic DC power requirements –– Electronic load modules for power supply testing –– Fast command processing time and output speed to improve throughput –– Connect
Output Sequencing Each DC power module or electronic load can be individually set to turn on or to turn off with a delay. By adjusting the delay times and then commanding the N6700 to turn on, you can set the N6700 modules to sequence on in a particular order. The same sequencing capability is available to shut down the modules in a particular order.
Plug High Power Mainframes Into Standard AC Sockets Without Dedicated High Current AC Circuits When you first turn on the N6702C 1200 W MPS mainframe, the mainframe automatically senses the power available from the AC line. If the AC line voltage is such that the resulting current would exceed a standard AC outlet rating, the mainframe automatically scales back the available output power to prevent overloading the AC line.
Figure 3. Front panel with up to 4 channels displayed simultaneously (Picture shows 3 channels installed.) Front Panel Quick Disconnects In addition to full control over its three standard interfaces, the N6700 has a full featured front panel to permit easy manual operation for test prototyping, debugging, and troubleshooting when used in an ATE system.
Choosing the right DC Power or Electronic load system to meet your ATE needs N6790 Electronic Load Series N6760 Precision Series N6780 SMU Series The new Keysight N6790 Series Modular Electronic Loads offer a 100W module and a 200W module each in a 1U footprint. Four different user operation modes are available: constant voltage, constant current, constant resistance, and constant power.
Additional Features When your testing requires a power supply to do more than just provide a constant DC level, the N6750 Series of high-performance, autoranging DC power modules and the N6760 Series of precision DC power modules are the perfect fit. These modules combine a fast output with flexible controls and sophisticated measurements. The N6750/60 is more than a power supply; it is a stimulus/ response instrument.
High-Speed Test Extensions To make your testing go even faster, the N6700 DC power modules offer HighSpeed Test Extensions (HSTE). This enhancement to the DC power modules extends the capabilities to include features similar to a built-in arbitrary waveform generator and a built-in oscilloscope. HSTE is optional on the N6730/40/50/70 DC power modules.
DC Electronic Load Module Feature Map For detailed product specifications and characteristics, refer to the Keysight N6700 Modular Power System Family Specifications Guide at http://literature.cdn.keysight.com/litweb/pdf/N6700-90001.pdf.
DC Power Module Feature Map, continued Feature ( = available) Source/measure units (SMU) N6781A N6785A N6782A N6786A N6784A N6783A-BAT N6783A-MFG Output rating 20 W 80 W 20 W 80 W 20 W 24 W 18 W 2-quadrant operation Auxiliary voltage measurement input Output disconnect relays Option 761 Option 761 Negative voltage protection Voltage or current priority mode Programmable output resistance 600 mV outp
DC Electronic Load Module Key Performance Specifications Note: This data sheet does not include a comprehensive list of all power module specifications and characteristics. Complete performance specifications and supplemental characteristics for all power modules can be found at http://literature.cdn.keysight.com/litweb/pdf/N6700-90001.pdf. See the Keysight N6700 Modular Power System Family Specifications Guide, part number N6700-90001.
DC Power Module Key Performance Specifications DC output ratings (volts/amps/watts) Ripple & noise (p-p/rms) Voltage programming accuracy Current programming accuracy Voltage measurement accuracy Current measurement accuracy N6731B 5 V/10 A/50 W 10 mV/2 mV 0.1% + 19 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 20 mA N6732B 8 V/6.25 A/50 W 12 mV/2 mV 0.1% + 19 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 10 mA N6733B 20 V/2.5 A/50 W 14 mV/3 mV 0.1% + 20 mV 0.15% + 20 mA 0.1% + 20 mV 0.
Low Profile Mainframe Key Characteristics Interface capabilities GPIB SCPI – 1993, IEEE 488.2 compliant interface LXI compliance Class C USB 2.0 Requires Keysight IO Library version M.01.01 or 14.0 and up 10/100 LAN Requires Keysight IO Library version L.01.01 or 14.
Ordering Information The Low Profile Mainframe System Is Available Two Ways –– You can order an N6700C, N6701C or N6702C mainframe and various modules as separate products. (See steps below.) Each item will arrive in a separate box so that you can assemble the system yourself. –– You can order an N6710C, N6711C or N6712C system, which is a buildto-order system that is shipped as a fully assembled multiple-output power supply. (See pages 15 and 16 for N6710C, N6711C and N6712C ordering information.
Ordering Information, continued Modules Order 1 to 4 modules to be installed in each N6700C, N6701C or N6702C mainframe. (To order modules as part of the N6710C, N6711C or N6712C build-to-order systems, see page 15). If the sum of the power of the modules exceeds the available output power rating on the mainframe, see page 3 for an explanation of Keysight’s power management capability. You can individually specify each option for each module.
Ordering Information, continued Available Options To N6700 Modules N6731BN6736B 50 W DC power modules N6741BN6746B 100 W DC power modules N6751AN6756A highperformance autoranging DC power modules N6761AN6766A precision DC power modules N6773AN6776A 300 W DC power modules N6781A, N6782A, N6784A, N6785A, N6786A, SMU modules N6783A-BAT N6783AMFG applicationspecific N6790 Series Electronic Loads Output disconnect relays 761 761 761 761 761 Standard 761 NA Output disconnect and polarity reversal
N6700 Build-To-Order System Build-to-order system To purchase an N6700 system, order an N6710C, N6711C, or N6712C. These model numbers are build-to-order systems that are shipped as a fully tested and assembled multiple-output power supplies. Each system consists of one mainframe plus optionally 1 to 4 modules. Each mainframe has four module slots to hold modules. Each module occupies one module slot, except for the N6753A–N6755A and the N6763A–N6766A and the N6792A, which occupy two module slots.
Ordering Information, continued Modules As Options To N6710C, N6711C, or N6712C Order 1 to 4 modules as options to an N6710C, N6711C or N6712C, specify its model number, followed by “-ATO.” For example, to order an N6731B as an option to the N6710C, you would specify “-ATO.” For example, to order an N6731B as an option to the N6710C, you would specify “N6731B-ATO”as the option. (To order modules as separate products, see page 14).
Need a Power Solution For R&D Bench Work? The Keysight N6705C DC Power Analyzer saves time –– Provides unrivaled productivity gains for sourcing and measuring DC voltage and current into your DUT by integrating up to 4 advanced power supplies or electronic loads with DMM, scope, arb, and data logger features. –– Eliminates the need to gather multiple pieces of equipment, create complex test setups including transducers (such as current probes and shunts) to measure current into your DUT.
