Keysight N6700 Modular Power System Family Low-Proile MPS Mainframes N6700B–N6702A, N6710B–N6712A DC Power Modules N6731B–N6784A Data Sheet
Small Size and Flexibility for ATE – Ideal for ATE systems in R&D, design validation, and manufacturing – Small size: up to four outputs in 1U of rack space – Flexible, modular system: Lets you mix and match power levels and performance levels to optimize your investment – Performance modules for critical test requirements – Value modules for basic DC power requirements – Fast command processing time and output speed to improve throughput – Connect via GPIB, LAN, or USB – Fully compliant to LXI Class C spec
Protection features Each N6700 module is protected against over-voltage, over-current, and over-temperature. A fault condition in one module can be detected within 10 microseconds by other modules so that they can be quickly shut down to avoid hazardous conditions on your device under test (DUT). Connectivity The N6700 MPS comes standard with GPIB, USB 2.0, and 10/100 Base-T ethernet LAN interfaces.
Programmable voltage slew For some applications, like inrush limiting or powering rate-sensitive devices, it is necessary to slow down and control the speed of the power supply to maintain a specific voltage slew rate. The N6700 provides programmable voltage slew rate, so that you can easily control the speed at which the output slews from one voltage to another. You can set the speed of a voltage change anywhere from its maximum up/down programming speed to its slowest change of up to 10 seconds.
Plug high power mainframes into standard AC sockets without dedicated high current AC circuits When you first turn on the N6702A 1200 W MPS mainframe, the mainframe automatically senses the power available from the AC line. If the AC line voltage is such that the resulting current would exceed a standard AC outlet rating, the mainframe automatically scales back the available output power to prevent overloading the AC line.
Figure 3. Front panel with up to 4 channels displayed simultaneously (Picture shows 3 channels installed.) Figure 4. Rear panel (Picture shows 3 channels installed.) Front panel Quick disconnects In addition to full control over its three standard interfaces, the N6700 has a full featured front panel to permit easy manual operation for test prototyping, debugging, and troubleshooting when used in an ATE system.
Choosing the right DC Power Modules to meet your ATE needs N6750 high-performance series For applications where the power supply plays a critical role – Now with available power up to 500 W The Keysight N6750 Series of highperformance, autoranging DC power modules provides low noise, high accuracy and programming speeds that are up to 10 to 50 times faster than other programmable power supplies.
Additional Features When your testing requires a power supply to do more than just provide a constant DC level, the N6750 Series of high-performance, autoranging DC power modules and the N6760 Series of precision DC power modules are the perfect fit. These modules combine a fast output with flexible controls and sophisticated measurements. The N6750/60 is more than a power supply; it is a stimulus/ response instrument.
Therefore, this 500 W autoranging power supply, due to its extended voltage and current range, can produce voltage and current combinations in the range of a 1000 W non-autoranging power supply. The flexibility of autoranging is useful when the DUT operates over a wide range of voltages, when the ATE system needs to test a wide range of DUTs, or when margin is needed because the ATE power supply must be selected before final DUT power requirements are determined.
HSTE also provides an oscilloscopelike digitizer built into the power module to capture voltage and current measurements of up to 524,288 points at up to 97,656 samples per second. Note that the N6780 SMUs measure at 195,312 samples per second.
DC Power Module Feature Map For detailed product specifications and characteristics, refer to the Keysight N6700 Modular Power System Family Specifications Guide at http://literature.cdn.keysight.com/N6700-90001.pdf.
DC Power Module Key Performance Speciications Note: This data sheet does not include a comprehensive list of all power module specifications and characteristics. Complete performance specifications and supplemental characteristics for all power modules can be found at http://literature.cdn.keysight.com/N6700-90001.pdf. See the Keysight N6700 Modular Power System Family Specifications Guide, part number N6700-90001.
DC Power Analyzer Mainframe Key Characteristics Interface capabilities GPIB SCPI – 1993, IEEE 488.2 compliant interface LXI compliance Class C USB 2.0 Requires Keysight IO Library version M.01.01 or 14.0 and up 10/100 LAN Requires Keysight IO Library version L.01.01 or 14.
Ordering Information The DC power analyzer system is available two ways 1. You can order an N6700B, N6701A or N6702A mainframe and various modules as separate products. (See steps below.) Each item will arrive in a separate box so that you can assemble the system yourself. 2. You can order an N6710B, N6711A or N6712A system, which is a build-to-order system that is shipped as a fully assembled multiple-output power supply. (See pages 18 and 19 for N6710B, N6711A and N6712A ordering information.
Ordering Information, continued Modules Modules Order 1 to 4 modules to be installed in each N6700B, N6701A or N6702A mainframe. (To order modules as part of the N6710B, N6711A or N6712A build-to-order systems, see page 18). If the sum of the power of the modules exceeds the available output power rating on the mainframe, see page 4 for an explanation of Keysight’s power management capability. N6730 50 W DC power modules You can individually specify each option for each module.
Ordering Information, continued Available options to N6700 modules N6731BN6736B 50 W DC power modules N6741BN6746B 100 W DC power modules N6751AN6756A high-performance autoranging DC power modules N6761AN6766A precision DC power modules N6773AN6776A 300 W DC power modules N6781A, N6782A, N6784A SMU modules N6783A-BAT N6783AMFG applicationspeciic Output disconnect relays 761 761 761 761 761 Standard 761 Output disconnect and polarity reversal relays 760 760 1, 2 760 1 760 1 760 2 Not ava
N6700 build-to-order system To purchase an N6700 system, order an N6710B, N6711A, or N6712A. These model numbers are build-toorder systems that are shipped as a fully tested and assembled multipleoutput power supplies. Each system consists of one mainframe plus optionally 1 to 4 modules. Each mainframe has four module slots to hold modules. Each module occupies one module slot, except for the N6753A–N6755A and the N6763A– N6766A, which occupy two module slots.
Ordering Information, continued Modules as options to N6710B, N6711A, or N6712A Order 1 to 4 modules as options to an N6710B, N6711A or N6712A, specify its model number, followed by “-ATO.” For example, to order an N6731B as an option to the N6710B, you would specify “-ATO.” For example, to order an N6731B as an option to the N6710B, you would specify “N6731BATO”as the option. (To order modules as separate products, see page 16).
Need a power solution for R&D bench work? The Keysight N6705B DC Power Analyzer saves time – Provides unrivaled productivity gains for sourcing and measuring DC voltage and current into your DUT by integrating up to 4 advanced power supplies with DMM, scope, arb, and data logger features. – Eliminates the need to gather multiple pieces of equipment, create complex test setups including transducers (such as current probes and shunts) to measure current into your DUT.
| Keysight | N6700 Modular Power System Family - Data Sheet myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium.
