Keysight N6700 Modular Power System Family N6731B-N6792A DC Power & Load Modules N6700C-N6705C Mainframes Specifications Guide
Legal Notices U.S. Government Rights The Software is “commercial computer software,” as defined by Federal Acquisition No part of this document may be Regulation (“FAR”) 2.101. Pursuant to FAR photocopied, reproduced, or translated to 12.212 and 27.405-3 and Department of another language without the prior Defense FAR Supplement (“DFARS”) agreement and written consent of Keysight 227.7202, the U.S.
Where to Find More Information This document provides specification and supplemental characteristic information for the following instruments: • Keysight N6731B through N6792A Power and Load Modules • Keysight N6700C-series and N6705C Mainframes For additional technical details and ordering information for the Keysight N6700 Modular Power System Family, refer to the following: Document Description Keysight N6700 Modular Power System Family: Low-Profile MPS Mainframe for Automated Test Environments Th
Contents 1.- Power Module Differences .................................................................................................. 7 Power Module Differences: Keysight N6700C Modular Power Systems ............................................................................................................... 8 Power Module Differences: Keysight N6705C DC Power Analyzers11 Power Module Option Characteristics ....................................................
7 - Keysight N6791A, N6792A Electronic Load Modules ...............................................57 Performance Specifications........................................................................ 58 Supplemental Characteristics ................................................................... 58 Output Quadrant Characteristic ............................................................... 60 8 - Keysight N6700 and N6705 series Mainframes...........................................................
Chapter 1 Power Module Differences Power Module Differences: Keysight N6700C Modular Power Systems ............................................................................................................... 8 Power Module Differences: Keysight N6705C DC Power Analyzers11 Power Module Option Characteristics .................................................... 14 This chapter provides a brief overview of the basic differences between the Keysight N6700 series DC Power Modules.
Power Module Differences: Keysight N6700C Modular Power Systems Keysight N6731B–N6777A Differences Feature DC Power High-Performance Precision (● = available) N673xB, N674xB, N677xA N675xA N676xA 50 W output rating N6731B – N6736B N6751A N6761A 100 W output rating N6741B – N6746B N6752A N6762A 300 W output rating N6773A – N6777A N6753A, N6754A N6763A, N6764A N6755A, N6756A N6765A, N6766A 500 W output rating Output disconnect relays Option 761 Option 761 Option 761 Output disconnect
Keysight N6781A–N6786A Differences Feature (● = available) N6781A Output rating 20 W ● 2-quadrant operation Source/Measure Units (SMU) Application-Specific N6782A N6784A N6783A BAT N6783A MFG 24 W ● 18 W ● 20 W ● 20 W N6785A N6786A 80 W ● 80 W ● ● 4-quadrant operation Auxiliary voltage measurement input ● Output disconnect relays ● ● ● ● ● Negative voltage protection ● ● ● ● ● Voltage or current priority mode ● ● ● ● ● Programmable output resistance ● Multiple voltage
Keysight N679xA Load Module Differences Feature Load Module (● = available) N6791A N6792A Input terminal short capability 100 W ● 200 W ● Arbitrary waveform generation ● ● Under voltage inhibit ● ● Voltage, current, power, and resistance priority ● ● Input rating NOTE 1 Number of resistance input ranges 3 3 Number of current input and measurement ranges 2 2 Number of voltage input and measurement ranges 1 1 Number of power measurement ranges Simultaneous voltage and current measur
Power Module Differences: Keysight N6705C DC Power Analyzers Keysight N6731B–N6777A Differences Feature DC Power High-Performance Precision (● = available) N673xB, N674xB, N677xA N675xA N676xA 50 W output rating N6731B – N6736B N6751A N6761A 100 W output rating N6741B – N6746B N6752A N6762A 300 W output rating N6773A – N6777A N6753A, N6754A N6763A, N6764A N6755A, N6756A N6765A, N6766A 500 W output rating Output disconnect relays Option 761 Option 761 Option 761 Output disconnect/po
Keysight N6781A–N6786A Differences Feature (● = available) N6781A Output rating 20 W ● 2-quadrant operation Source/Measure Units (SMU) Application-Specific N6782A N6784A N6783A BAT N6783A MFG 24 W ● 18 W ● 20 W ● 20 W N6785A N6786A 80 W ● 80 W ● ● 4-quadrant operation Auxiliary voltage measurement input ● ● Output disconnect relays ● ● ● ● ● ● ● ● ● ● Negative voltage protection ● ● ● ● ● Voltage or current priority mode ● ● ● ● ● CC load/CV load ● ● ● ● ● Vo
Keysight N679xA Load Module Differences Feature Load Module (● = available) N6791A N6791A Input terminal short capability 100 W ● 200 W ● Arbitrary waveform generation ● ● Under voltage inhibit ● ● Voltage, current, power, and resistance priority ● ● Input rating NOTE 1 Number of resistance ranges 3 3 Number of current input and measurement ranges 2 2 Number of voltage input and measurement ranges 1 1 Number of power input and measurement ranges Simultaneous voltage and current me
Power Module Option Characteristics Option 760 & 761 Option 761 provides output and sense disconnect relays. Option 760 provides polarity reversal in addition to output and sense disconnect. Note that models N678xA SMU have output and sense disconnect relays built in. • Option 760 limits the output current to 10 A on Models N6742B and N6773A.
Chapter 2 Keysight N673xB, N674xB, N677xA DC Power Modules Performance Specifications (N6731B-N6746B).................................. 16 Performance Specifications (N6773A-N6777A) .................................. 17 Supplemental Characteristics (N6731B-N6746B) ............................. 18 Supplemental Characteristics (N6773A-N6777A).............................. 19 Output Quadrant Characteristic ...............................................................
Performance Specifications (N6731B-N6746B) N6731B/ N6741B N6732B/ N6742B N6733B/ N6743B N6734B/ N6744B N6735B/ N6745B N6736B/ N6746B 0-5V 0-8V 0 - 20 V 0 - 35 V 0 - 60 V 0 - 100 V DC Output Ratings: Voltage NOTE 2 Current NOTE 1 0-10 A/ 0-20 A 0-6.25 A/0-12.5 A 0-2.5 A / 0-5 A 0-1.5 A / 0-3 A 0-0.8 A / 0-1.6 A 0-0.5 A / 0-1 A Power 50 W / 100 W 50 W / 100 W 50 W / 100 W 52.
Performance Specifications (N6773A-N6777A) N6773A N6774A N6775A N6776A N6777A 0 - 20 V 0 - 35 V 0 - 60 V 0 - 100 V 0 - 150 V DC Output Ratings: Voltage Current 0 - 8.
Supplemental Characteristics (N6731B-N6746B) N6731B/ N6741B N6732B/ N6742B N6733B/ N6743B N6734B/ N6744B N6735B/ N6745B N6736B/ N6746B Programming Ranges: Voltage 15 mV – 5 .1 V 15 mV – 8 .16 V 30 mV – 20.4 V 40 mV – 35.7 V 70 mV – 61.2 V 100 mV – 102 V Current 60 mA – 10.2A/ 60 mA – 20.4 A 40 mA –6.375 A/ 40 mA – 12.75 A 10 mA – 2.55 A/ 10 mA – 5.1 A 5 mA – 1.53 A/ 5 mA – 3.06 A 2.5 mA – 0.85 A/ 2.5 m A – 1.7 A 1.5 mA – 0.51A/ 1.5 mA – 1.02 A Programming Resolution: Voltage 3.
Supplemental Characteristics (continued) N6731B/ N6741B N6732B/ N6742B N6733B/ N6743B N6734B/ N6744B N6735B/ N6745B N6736B/ N6746B 4 mA 2 mA 2 mA 2 mA 2 mA Output Ripple and Noise (PARD): CC rms 8 mA Common Mode Noise: (from 20 Hz – 20 MHz; from either output to chassis) Rms Peak-to- peak 1 mA 1 mA 1 mA 1 mA 1 mA 1 mA < 15 mA < 10 mA < 10 mA < 10 mA < 10 mA < 10 mA Remote Sense Capability: Outputs can maintain specifications with up to a 1-volt drop per load lead.
Supplemental Characteristics (continued) N6773A N6774A N6775A N6776A N6777A N6705 Mainframe Oscilloscope Measurement Accuracy: (@ 23 °C ±5 °C; accuracy of any individual point in the trace) Voltage 0.1% + 45 mV 0.1% + 75 mV 0.1% + 120 mV 0.1% + 160 mV 0.1% + 175 mV Current 0.15% + 45 mA 0.15% + 27 mA 0.15% + 22 mA 0.15% + 12 mA 0.15% + 12 mA 0.15% + 35 mA 0.15% + 22 mA 0.15% + 19 mA 0.15% + 9 mA 0.
Output Quadrant Characteristic Voltage maximum power + rated voltage 0 + rated current Current Arbitrary Waveform Generator Maximum Bandwidth NOTE The information in this section only applies when the power modules are installed in a Keysight N6705 DC Power Analyzer. The following tables characterize the maximum bandwidth of the arbitrary waveform generator. The maximum bandwidth is based on a sine wave into a resistive load and apples to any output current.
Arbitrary Waveform Generator Maximum Bandwidth (continued) Voltage 3 dB max THD 3 dB 6 dB max THD 6 dB 3 dB max THD 3 dB N6733B & N6743B 6 dB max THD 6 dB N6773A 0.2 Vp-p 110 Hz 1.0% 190 Hz 3.0% 125 Hz 1.5% 210 Hz 4.0% 0.4 Vp-p 110 Hz 1.0% 160 Hz 3.0% 125 Hz 1.5% 180 Hz 4.0% 1.0 Vp-p 72 Hz 6.0% 95 Hz 6.0% 75 Hz 6.0% 95 Hz 6.0% 2.0 Vp-p 40 Hz 8.0% 55 Hz 8.5% 42 Hz 9.0% 60 Hz 9.
Chapter 3 Keysight N675xA High Performance Power Modules Performance Specifications........................................................................ 24 Supplemental Characteristics ................................................................... 25 Autoranging Characteristic......................................................................... 27 Output Impedance Graphs ......................................................................... 27 Arbitrary Waveform Generator Maximum Bandwidth ..
Performance Specifications N6751A/N6752A N6753A/N6755A N6754A/N6756A 0 - 50 V 0 - 20 V 0 - 60 V 0 - 5 A / 0 - 10 A 0 - 50 A 0 - 20 A / 0 - 17A 50 W / 100 W 300 W / 500 W 300 W / 500 W CV peak-to-peak 4.5 mV 5 mV 6 mV CV rms 0.35 mV 1 mV 1 mV DC Output Ratings: Voltage Current NOTE 1 Power Output Ripple and Noise (PARD): (from 20 Hz – 20 MHz) Load Effect (Regulation): (Applies for any output load change, with a maximum load-lead drop of 1V/lead.
Supplemental Characteristics N6751A / N6752A N6753A / N6755A N6754A / N6756A Voltage 20 mV – 51 V 10 mV – 20.4 V 25 mV- 61.2 V Current 10 mA – 5.1A/10 mA – 10.2A 50 mA – 51 A 20 mA – 20.4 A/20 mA – 17.3A Programming Ranges: Programming Resolution: Voltage 3.5 mV 1.5 mV 4.2 mV Current 3.25 mA 16.3 mA 6.5 mA Measurement Resolution: Voltage 1.8 mV 0.8 mV 2.2 mV Current 410 µA 2.05 mA 0.
Supplemental Characteristics (continued) N6751A / N6752A N6753A / N6755A N6754A / N6756A Down-programming Settling Time with no load: (Time from start of voltage change to 0.1% of full scale value) Small voltage step Time 10 V to 0 V 0.45 ms 6 V to 0 V/10 V to 0 V 0.8 ms/1.3 ms 15 V to 0 V/29 V to 0 V 0.8 ms/1.5 ms Large voltage step Time 50 V to 0 V 1.4 ms 20 V to 0 V 2 ms 60 V to 0 V 2.3 ms Down-programming Time with Capacitive load: (Time from start of voltage change to output voltage < 0.
Autoranging Characteristic N6751A 50 W Output Voltage Voltage 50 V N6752A 100 W Output Voltage N6753A / N6754A 300 W Output 20 V 60 V 50 V Voltage N6755A / N6756A 500 W Output 20 V 60 V 500 W curve 50 W curve 100 W curve 6V 15 V 12 V Current 8.5 V 10 V 0 1A 5A 0 300 W curve Current 2A Current 0 8.33 A 10 A 10 V 29 V 15 A 5A 50 A 20 A Current 0 25 A 8.33 A 50 A 17 A Output Impedance Graphs Magnitude 4 90 45 2 Phase 1 0 0.5 -45 0.
135 90 40 90 40 20 45 20 0 10 -45 5 -90 2.5 Phase 10 5 2.5 45 Phase -45 Magnitude Magnitude 1.25 1.25 0.62 0.62 1k 100 10k 100k 100 1k FREQUENCY (Hz) Model N6753A and N6755A, CV Mode, @20 V, 15A 10k FREQUENCY (Hz) 100k Model N6753A and N6755A, Option 760, CV Mode, @20 V, 15A 0.8 0.8 Magnitude Magnitude IMPEDANCE (ohms) 0 0.4 0.4 Phase 90 Phase 45 0.2 45 0.1 0 0.1 0 0.05 -45 0.05 -45 0.025 -90 0.025 -90 0.0125 -135 0.0125 0.2 0.0062 0.
90 0.4 90 0.2 45 0.2 45 0.1 0 0.1 0 -45 0.05 0.05 Phase 0.025 -90 Magnitude 0.0125 Phase 0.025 -90 Magnitude 0.0125 0.0062 0.0062 100 1k 10k 100 100k 1k 10k 100k FREQUENCY (Hz) FREQUENCY (Hz) Model N6754A and N6756A, CV Mode, @60 V, 5A Model N6754A and N6756A, Option 760, CV Mode, @60 V, 5A 8 IMPEDANCE (ohms) -45 8 Magnitude Magnitude 4 4 45 2 Phase 45 2 Phase 0 1 0.5 -45 0.5 -45 0.25 -90 0.25 -90 0.125 -135 0.125 -135 1 0.062 0 0.
Arbitrary Waveform Generator Maximum Bandwidth NOTE The information in this section only applies when the power modules are installed in a Keysight N6705 DC Power Analyzer. The following tables characterize the maximum bandwidth of the arbitrary waveform generator. The maximum bandwidth is based on a sine wave into a resistive load and apples to any output current. The following definitions apply in the frequency tables: V p-p = Voltage peak-to-peak 3 dB max. = Max.
Chapter 4 Keysight N676xA Precision Power Modules Performance Specifications........................................................................ 32 Supplemental Characteristics ................................................................... 33 Autoranging Characteristic......................................................................... 35 Output Impedance Graphs ......................................................................... 35 Arbitrary Waveform Generator Maximum Bandwidth .........
Performance Specifications N6761A/N6762A N6763A/N6765A N6764A/N6766A 0 - 50 V 0 - 1.5 A / 0 - 3 A 0 - 20 V 0 - 50 A 0 - 60 V 0 - 20 A / 0 - 17 A 50 W / 100 W 5.5 V; 100 mA 5.5 V; 100 mA 300 W / 500 W 2 V; 1.5 A 300 W / 500 W 6 V; 0.5 A 5 mV 1 mV 6 mV 1 mV DC Ratings: Voltage NOTE 1 Current Power Low programming ranges (V & I) Low measurement ranges (V & I) Output Ripple and Noise (PARD): (from 20 Hz – 20 MHz) CV peak-to-peak CV rms 4.5 mV 0.
Supplemental Characteristics N6761A / N6762A N6763A / N6765A N6764A / N6766A Voltage, high range 15 mV – 51 V 10 mV – 20.4 V 25 mV- 61.2 V Voltage, low range 12 mV – 5.5 V - - Current, high range 1 mA–1.53 A/1 mA–3.06 A 50 mA – 51 A 20 mA–20.4A/20mA–17.3A Current, low range 0.1 mA – 0.1 A - - 880 µV 1.5 mV 4.2 mV Programming Ranges: NOTE 1 Programming Resolution: Voltage, high range Voltage, low range 90 µV - - Current, high range 60 µA 16.3 mA 6.
Supplemental Characteristics (continued) N6761A / N6762A N6763A / N6765A N6764A / N6766A Up-programming Settling Time with full resistive load: (Time from start of voltage change to 0.1% of full scale value) Small voltage step Time Large voltage step Time 0 V to 10 V 0.9 ms 0 V to 50 V 4 ms 0 V to 6 V/0 V to 10 V 0.8 ms/1.0 ms 0 V to 20 V 3 ms 0 V to 15 V/0 V to 29 V 0.8 ms/1.4 ms 0 V to 60 V 4.2 ms Down-programming Time with no load: (time from start of voltage change to output voltage < 0.
Autoranging Characteristic Voltage N6761A / N6762A 50 W / 100 W Output Voltage N6763A / N6764A 300 W Output Voltage 20 V 60 V 20 V 60 V 50 V N6765A / N6766A 500 W Output 500 W curve 33 V 300 W curve 10 V 29 V 6V 15 V 0 1 A 1.5 A - 50 W 2 A 3 A - 100 W Current Current Current 0 15 A 5A 0 50 A 20 A 25 A 8.33 A 50 A 17 A Output Impedance Graphs 320 8 40 PHASE (degrees) 135 90 20 45 10 0 5 Phase Magnitude 2.5 -45 Magnitude 4 90 2 45 Phase 1 0 0.5 -45 0.
0.8 0.8 Magnitude 0.4 Phase 90 Phase 45 0.2 45 0.1 0 0.1 0 0.05 -45 0.05 -45 0.025 -90 0.025 -90 0.0125 -135 0.0125 0.2 0.0062 0.0062 100 1k 10k 100k 100 1k FREQUENCY (Hz) Model N6763A and N6765A, CC Mode, @20 V, 15A 0.4 90 0.4 90 0.2 45 0.2 45 0.1 0 0.1 0 -45 0.05 -90 0.025 Phase 0.025 Magnitude 0.0125 Phase -45 PHASE (degrees) IMPEDANCE (ohms) 100k 0.8 0.05 -90 Magnitude 0.0125 0.0062 0.
Arbitrary Waveform Generator Maximum Bandwidth NOTE The information in this section only applies when the power modules are installed in a Keysight N6705 DC Power Analyzer. The following tables characterize the maximum bandwidth of the arbitrary waveform generator. The maximum bandwidth is based on a sine wave into a resistive load and apples to any output current. The following definitions apply in the frequency tables: V p-p = Voltage peak-to-peak 3 dB max. = Max.
Chapter 5 Keysight N678xA Source/Measure Units Performance Specifications........................................................................ 40 Supplemental Characteristics ................................................................... 42 Output Quadrant Characteristic ............................................................... 47 Output Impedance Graphs ......................................................................... 48 Voltage Programming Response ...................................
Performance Specifications N6781A / N6782A N6784A N6785A / N6786A DC Ratings: Voltage Current NOTE 1 Power Auxiliary Voltage Measurement Input NOTE 2 20 V/6 V ±20 V/± 6 V 20 V/15 V/10 V/6 V ± 1 A/± 3 A ± 1 A/± 3 A ± 4 A/± 5 A/± 6.7 A/± 8 A 20 W 20 W 80 W ± 20 V - ± 20 V Output Voltage Ripple & Noise (PARD) from 20 Hz – 20 MHz: Measured at the output terminals, under all load conditions, in Voltage Priority mode.
Performance Specifications (continued) N6781A / N6782A N6784A N6785A / N6786A Measurement Accuracy @ 23 °C ±5 °C: Applies when measuring the default value of 4883 data points with a 20.48 μs time interval. Refer to “Measurement Accuracy and Resolution” later in this chapter for more information. Voltage, 20 V range 0.025% + 1.2 mV Voltage, 1 V range Voltage, 100 mV range Auxiliary Voltage Measurement Input 0.025% + 1.2 mV 0.025% + 1.8 mV 0.025% + 75 μV 0.025% + 75 μV - 0.025% + 50 μV 0.
Supplemental Characteristics N6781A / N6782A N6784A N6785A / N6786A 10 mA 10 mA 8 mA - - 8 mA 20 mA 20 mA 8 mA - - 20 mV 3 A range Current Priority mode 10 mV 10 mV - 1 A range Current Priority mode 20 mV 20 mV - Voltage, 20 V range 0 to 20.4 V; 200 μV -20.4 V to 20.4 V; 200 μV 0 to 20.4 V; 200 μV Voltage, 15 V range - - 0 to 15.3 V; 200 μV Voltage, 10 V range - - 0 to 10.2 V; 200 μV Voltage, 6 V range 0 to 6.12 V; 60 μV -6.12 V to 6.12 V; 60 μV 0 to 6.
Supplemental Characteristics (continued) N6781A / N6782A N6784A N6785A / N6786A Measurement Accuracy Temperature Coefficient per °C: 0.003% +75 uV 0.0007% +200 uV 0.002% +110 uA 0.0025% +0.4 uA 0.002% +5 nA - 0.0025% +25 uV 0.002% +2.5 uV 0.0025% +2.5 uV 0.0025% +14 uA 0.0025% +0.4 uA 0.002% +5 nA 0.002% +0.55 nA 0.0025% +25 uV 0.002% +2.5 uV 0.0025% +2.5 uV 0.0007% +200 uV 0.0025% +14 uA 0.0025% +0.4 uA 0.002% +5 nA 0.002% +0.
Supplemental Characteristics (continued) N6781A / N6782A Voltage Measurement Noise: (peak value) N6784A 3 mV 250 μV 50 μV 20 V range 1 V range 100 mV range N6785A / N6786A 3 mV 250 μV 50 μV 2.
Supplemental Characteristics (continued) N6781A / N6782A Current Programming Speed & Settling Time (continued) Settling Time to 0.
Supplemental Characteristics (continued) N6781A / N6782A Current Measurement Small Signal Bandwidth (continued) –3 dB typical with seamless ranging On 8 A range 3 A range 100 mA range 1 mA range –1 dB typical with seamless ranging Off 8 A range 3 A range 100 mA range 1 mA range 10 μA range –1 dB typical with seamless ranging On 8 A range 3 A range 100 mA range 1 mA range N6784A N6785A / N6786A DC to 26 kHz DC to 26 kHz DC to 10 kHz - DC to 26 kHz DC to 27 kHz DC to 10 kHz DC to 16 kHz DC to 16 kHz DC
Output Quadrant Characteristic Voltage N6781A, N6782A, 20 W -1 A Voltage +1 A +20 V +1 A +20 V N6784A, 20 W +3 A +6 V +3 A -3 A +6 V Current 0 Current -6 V -3 A 0 Key -20 V -1 A Sourcing power Sinking power Note 1 Voltage Voltage -0.9 A N6785A, -4 A N6786A, 80 W -5 A +15 V +4 A, +20 V -2.3 A +5 A, +15 V -6.7 A +6.7 A, +10 V -8 A +8 A, +6 V Current 0 +2.2 V N6784A Downprogrammer derating Current -2.2 V +2.3 A -15 V +0.9 A Note 1.
Output Impedance Graphs N6781A N6782A N6784A CV Mode @3V, 0.5A N6781A N6782A N6784A CC Mode @2.4V, 0.
N6785A N6786A CV Mode @3V, 0.5A N6785A N6786A CC Mode @2.4V, 0.
Voltage Programming Response The following graphs show the voltage programming response with the indicated bandwidths and loads. Note that the load ESR=200 mΩ.
N6785A N6786A Bandwidth LOW HIGH 1 N6785A N6786A Bandwidth HIGH 2 HIGH 3 N6731B-N6792A DC Power & Load Modules N6700C-N6705C Mainframes Specifications Guide 51
Measurement Accuracy and Resolution (with shorter measurement intervals) The following table shows changes to the short-term measurement accuracy and resolution with various number of power line cycle (NPLC) measurement settings. Changes are due to the A-to-D converter’s noise performance. The table’s baseline is 1 NPLC with no added noise. To determine the measurement accuracy at shorter averaging intervals, simply add the noise value to the fixed accuracy value in the specification table.
Chapter 6 Keysight N6783A-BAT, N6783A-MFG Application-Specific Power Modules Performance Specifications........................................................................ 54 Supplemental Characteristics ................................................................... 55 Output Quadrant Characteristic ............................................................... 56 Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C after a 30-minute warm-up period.
Performance Specifications N6783A-BAT N6783A-MFG 0-8V 0-6V – 2 to +3 A – 2; 0 to +3 A 24 W 18 W 150 mA 150 mA 8 mV 8 mV 1.5 mV 1.5 mV DC Ratings: Voltage Current NOTE 1 Power Low current measurement range Output Ripple and Noise (PARD): (from 20 Hz – 20 MHz) CV peak-to-peak CV rms Load Effect (Regulation): (For any output load change, with a maximum load-lead drop of 0.5V/lead. The load lead drop reduces the maximum available voltage at the load.
Supplemental Characteristics N6783A-BAT N6783A-MFG 15 mV – 8.16 V 5 mA – 3.06 A – 5 mA to – 2 A 15 mV – 6.12 V 5 mA – 3.06 A Fixed at – 2 A 2.5 mV 1 mA 10 mA 2.5 mV 1 mA N/A 300 µV 100 µA 5 µA 300 µV 100 µA 5 µA 25 ppm + 50 µV 25 ppm + 10 µA 25 ppm + 50 µV 25 ppm + 10 µA 25 ppm + 40 µV 25 ppm + 2.5 µA 25 ppm + 1.5 µA 25 ppm + 40 µV 25 ppm + 2.5 µA 25 ppm + 1.
Supplemental Characteristics (continued) N6783A-BAT N6783A-MFG Series and Parallel Operation: Identically rated outputs can be operated directly in parallel. N6783A modules cannot be used in series with other N6783A modules or any other N67xx module. Down-programming Capability: (Current down-programming capability is reduced at output voltages below 0.
Chapter 7 Keysight N6791A, N6792A Electronic Load Modules Performance Specifications........................................................................ 58 Supplemental Characteristics ................................................................... 58 Output Quadrant Characteristic ............................................................... 60 Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C after a 30-minute warm-up period.
Performance Specifications N6791A N6792A Current 0 - 20 A 0 - 40 A Voltage 0 – 60 V 0 - 60 V 100 W 200 W Input Ratings: Maximum Power @ 40 °C NOTE 1 Specified Current @ Low Voltage Operation: (see Output Quadrant Characteristic) 1.6 V 20 A 40 A 1V 12.5 A 25 A 0.5 V 6.25 A 12.5 A 0.1 V 1.25 A 2.5 A Programming Accuracy: (@ 25 °C ±5 °C after a 30 minute warm-up. Applies from minimum to maximum programming range at any load.) Current high range 20 A/40 A 0.04 % + 2.6 mA 0.04 % + 5.
Supplemental Characteristics N6791A N6792A 5 mA – 20.4 A; 250 µA 1 mA – 2.04 A; 25 µA 10 mV – 61.2 V; 1.5 mV 30 Ω – 8 k Ω; 25 µS 2 Ω – 100 Ω; 250 µS 80 mΩ – 3 Ω; 250 µS 0.3 W – 102 W; 15 mW 0.04 W–10.2 W; 1.5 mW 10 mA – 40.8 A; 500 µA 2 mA – 4.08 A; 50 µA 10 mV – 61.2 V; 1.5 mV 15 Ω – 8 k Ω; 50 µS 2 Ω – 100 Ω; 500 µS 40 mΩ – 3 Ω; 500 µS 0.5 W – 204 W; 30 mW 0.1 W – 20.4 W; 3 mW 5 mA 1 mA 10 mV Fixed at 2 A Fixed at 20 A Fixed at 20 A 0.3 W 0.
Supplemental Characteristics (continued) N6791A N6792A 0.2 % +0.1A 0.2 % +0.1A 21.42 A ±0.15 A 2.142 A ±0.15 A 66 V ±0.35 V 110 W 0.2 % +0.1A 0.2 % +0.1A 42.84 A ±0.24 A 4.284 A ±0.20 A 66 V ±0.35 V 220 W 0.04 +16 mA 0.04 +14 mA 0.03 +13 mV 0.04 +23 mA 0.04 +20 mA 0.
Chapter 8 Keysight N6700 and N6705 series Mainframes Supplemental Characteristics ................................................................... 62 Outline Diagrams ........................................................................................... 64 Supplemental characteristics are not warranted but are descriptions of performance determined either by design or by type testing. All supplemental characteristics are typical unless otherwise noted.
Supplemental Characteristics N6700B, N6701A, N6702A N6700C, N6701C, N6702C N6705B, N6705C 400 W (for N6700B/C mainframes) 600 W (for N6701A/C mainframes) 1200 W (for N6702A/C mainframes) 600 W N/A 20 A N/A N/A N/A N/A Digital TTL level compatible 5V >6 ns, pos-going; >90 ns, neg-going 10 ms, negative going N/A N/A 200 mA 300 mA 8 Mbyte 4 Gbyte Maximum Power Available for Modules: Values represent combined power rating of all modules installed per mainframe.
Supplemental Characteristics (continued) N6700B, N6701A, N6702A N6700C, N6701C, N6702C N6705B, N6705C Regulatory Compliance: EMC Complies with European EMC Directive for test and measurement products. IEC/EN 61326-1; CISPR 11, Group 1, class A; AS/NZS CISPR 11; ICES/NMB-001 Complies with Australian standard and carries the RCM mark. This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme à la norme NMB-001 du Canada.
Outline Diagrams 64 N6731B-N6792A DC Power & Load Modules N6700C-N6705C Mainframes Specifications Guide
This information is subject to change without notice. © Keysight Technologies 2010 - 2019 Edition 10, February 2019 N6700-90001 www.keysight.