Datasheet

04 | Keysight | Streamline Series P924xA USB Oscilloscopes - Data Sheet
Zone touch triggering eliminates the complexity of setting up advanced triggers. If you
have a touch-enabled display on your controller, you can trigger on events by simply
drawing a box with your finger on the display of the signal you want to isolate. Keysight
pioneered the zone touch trigger, which allows easy capture of difficult-to-define trigger
events.
Industry-exclusive Zone Touch Trigger Makes Triggering Simple
The P924xAs’ high, uncompromised update rate increases your chance of seeing random
and infrequent signal anomalies, and zone touch trigger helps you isolate the signals.
Now your testing can be faster and more thorough.
Other touch-based operation
Just like Keysight’s touch-enabled InfiniiVision benchtop oscilloscopes (3000T, 4000
and 6000 X-Series), the P924xA Keysight Streamline Series USB oscilloscopes also uses
touch capability to interact with signal display. In addition to zone touch trigger, these
oscilloscopes also let you move the waveform up/down; adjust the time offset and zoom;
and define one of the two touch zone triggers. All that is required is a touch-enabled
display connected to your USB scope.
www.keysight.com/find/usb-scope
Capturing a serial data stream using a simple edge trigger. Zone Trigger enable quick and easy isolation of the data pattern of interest.