Datasheet

05 | Keysight | Streamline Series P924xA USB Oscilloscopes - Data Sheet
Additional Software for Added Functionality
P9240AWGA WaveGen 20 MHz
function/arbitrary waveform
generator
The P924xA Streamline Series USB
oscilloscopes offer a 20-MHz built-in
function/arbitrary waveform generator.
The WaveGen provides standard stimulus
output waveforms to your device under
test as well as user-definable frequencies,
amplitudes, offset and pulse widths
and arbitrary waveform capability. The
WaveGen output is routed to a MMCX
connector on the front panel of the
oscilloscope.
Use the built-in waveform editor to create
custom waveforms to output on the
oscilloscope’s WaveGen. It is also possible
to capture a known good or ‘golden’
waveform on a scope channel and then
save that to the ARB so you can generate
it to stimulate your system under test.
P9240BDLA Application Bundle
for Keysight USB oscilloscopes
Take advantage of a new oscilloscope
application bundle that will enable ALL
software applications (including Wavegen)
on your Keysight USB oscilloscope for a
huge discount over buying the options
individually. See a complete list of
applications in Step 2 of the configuration
table. (page 10)
P9240FRAA frequency response
analyzer
Frequency response analysis is a critical
measurement to characterize the stability
of feedback networks and switch-mode
power supplies. This capability is achieved
with a gain and phase measurement
versus frequency (Bode plot). By using the
waveform generator output to stimulate
your design and probing the input and
output signals on channels 1 and 2, the
oscilloscope provides a clear report on the
gain and phase operation of the system.
www.keysight.com/find/usb-scope