Datasheet

04 | Keysight | U1450A/U1460A Insulation Resistance Testers - Data Sheet

Capable of handling MORE abuse in industrial settings

The insulation resistance testers are housed in robust overmold enclosures, certified to IP 67 for protection against water and

dust. The robust tool is tested to withstand drops up to 3 meters (10 feet) high and operates over harsh temperature range of

–40 to +55 °C

. Built to handle tough conditions and certified to stringent industrial standards, the U1450A/U1460A series is

what you need to face the demands of everyday tasks.

1. U1453A /U1461A only

2. Refer to U1450A/U1460A Series Comparison Chart at a glance

Test the MOST applications with the

same device

The adjustable insulation test voltage from 10 V to 1.1 kV in

1 V steps on selected two models

allows you to set precise

test voltages catered to unique test application requirements.

These typical applications are commercial avionics testing,

military communications system testing and production line

testing. The standard test voltages from 50 V to 1 kV is also

available for selected models

Figure 5. Adjustable insulation test voltage up to 1.1 kV

Make MORE measurements with two-

in-one tool

Selected models of the U1450A/U1460A series insulation

resistance testers includes a full-featured OLED digital

multimeter, with up to 4 ½ digits of resolution. Get all the

functionality such as voltage measurements (AC V/DC V/AC

mV/DC mV), current measurements (AC mA/DC mA/AC µA/

DC µA), capacitance, resistance, temperature, diode test,

low pass filter (LPF) and non-contact AC voltage detection

(Vsense) that caters for a broad range of applications. Stretch

to measure more for higher accuracy measurements readings

with crystal clear OLED display – all within one tool.

Figure 6. Insulation resistance tester with full featured DMM