Datasheet

ManualsBrandsKeysight ManualsComponent Testing InstrumentsLCR Meter, Handheld, 200MOhm, 2kH, 20pF

DATA SHEET

Take your expectations higher with the latest LCR meters

U1730C Series Handheld LCR Meters

The Keysight Technologies, Inc. U1730C Series handheld LCR meters allow

you to measure at frequencies as high as 100 kHz—a capability typically

found only in benchtop meters. Get measurements done faster using the

one-touch automatic identification function button which displays compo-

nent type and more detailed component analysis such as Z, ESR, and DCR.

Ideal for testing on the go, these LCR meters operate on a battery that lasts

up to 16 hours. With the U1730C Series that is built for your convenience,

you can perform quick and basic LCR measurements at an affordable price.

Summary of content (10 pages)

PAGE 1
DATA SHEE T Take your expectations higher with the latest LCR meters U1730C Series Handheld LCR Meters The Keysight Technologies, Inc. U1730C Series handheld LCR meters allow you to measure at frequencies as high as 100 kHz—a capability typically found only in benchtop meters. Get measurements done faster using the one-touch automatic identification function button which displays component type and more detailed component analysis such as Z, ESR, and DCR.
PAGE 2
Features Key features –– 20,000 counts resolution –– 0.
PAGE 3
Take a Closer Look Visible and audible tolerance mode for component sorting Secondary display Maximum, Minimum and Average values recording 20,000 counts resolution Ai helps identify L, C, and R components automatically according to level of impedance ESR function for capacitance series resistance analysis Data Hold function to freeze and save measured values Allows manual or auto ranging to be used interchangeably Auto calculation of Phase Angle, Dissipation Factor, and Quality Factor To select desir
PAGE 4
U1731C/U1732C/U1733C Electrical Specifications Accuracy is given as ± (% of reading + counts of least significant digit) at 23 °C ± 5 °C, with relative humidity less than 80%. Please refer to the User Guide about the measuring mode specified for each range of L/C/R, series or parallel mode. Measurements performed at the test socket and necessary Open and Short corrections must prior be done. The accuracy is verified by design and specified type tests.
PAGE 5
U1731C/U1732C/U1733C Electrical Specifications Inductance2 Accuracy = AL + Offset Range Resolution U1732C/U1733C U1733C 100 Hz 120 Hz 1 kHz 10 kHz 100 kHz 0.001 μH NA NA NA 1.0% + 5 2.5% + 20 200 μH 0.01 μH NA NA 1.0% + 5 0.7% + 3 2.5% + 20 2000 μH1 0.1 μH 0.7% + 10 0.7% + 10 0.5% + 3 0.5% + 3 0.8% + 20 20 mH 0.001 mH 0.5% + 3 0.5% + 3 0.2% + 3 0.3% + 3 0.8% + 10 200 mH 0.01 mH 0.5% + 3 0.5% + 3 0.2% + 3 0.2% + 3 1.0% + 10 2000 mH 0.1 mH 0.2% + 3 0.2% + 3 0.
PAGE 6
U1731C/U1732C/U1733C Electrical Specifications Test Signal Test signal level Test frequency Model Selection Level Accuracy Frequency Accuracy U1731C/U1732C/U1733C 100 Hz 0.74 Vrms 0.05 Vrms 100 Hz ± 0.01% 120 Hz 0.74 Vrms 0.05 Vrms 120.481 Hz ± 0.01% 1 kHz 0.74 Vrms 0.05 Vrms 1 kHz ± 0.01% U1732C/1733C 10 kHz 0.70 Vrms 0.05 Vrms 10 kHz ± 0.01% U1733C 100 kHz 0.70 Vrms 0.05 Vrms 100 kHz ± 0.01% DCR +1.235 V 0.
PAGE 7
U1731C/U1732C/U1733C Electrical Specifications Source Impedance of Inductance Measurement Typical source impedance Range U1732C/U1733C U1733C 100 Hz 120 Hz 1 kHz 10 kHz 190 kHz 20 μH NA NA NA 190 Ω 100 Ω 200 μH NA NA 190 Ω 190 Ω 190 Ω 2000 μH 190 Ω 190 Ω 190 Ω 190 Ω 190 Ω 20 mH 190 Ω 190 Ω 190 Ω 190 Ω 190 Ω 200 mH 190 Ω 190 Ω 190 Ω 1.09 kΩ 1.09 kΩ 2000 mH 190 Ω 190 Ω 1.09 kΩ 10.1 kΩ 1.09 kΩ 20 H 1.09 kΩ 1.09 kΩ 10.1 kΩ 10.1 kΩ 1.09 kΩ 200 H 10.1 kΩ 10.
PAGE 8
General Specifications Parameter U1731C U1732C U1733C Measurements Z/L/C/R/D/Q/θ/ESR Z/L/C/R/D/Q/θ/ESR Z/L/C/R/D/Q/θ/ESR/DCR Display Primary display: Maximum display 19,999 counts Secondary display: Maximum display 999 counts Automatic polarity indication Test frequency (Accuracy = ± 0.
PAGE 9
Ordering Information Standard Shipped Items Standard U1731C, U1732C, and U1733C ordering include: –– Quick Start Guide –– Certificate of Calibration (CoC) –– Alligator clip leads –– 9 V alkaline battery Recommended Accessories U1731P Combo Kit Includes one U1731C Series handheld and four accessories: –– U5491A soft carrying case –– U5481B IR-to-USB cable –– U1780A AC adaptor –– U1782B SMD tweezer U1732P Combo Kit Includes one U1732C Series handheld and four accessories: –– U5491A soft carrying c
PAGE 10
Ordering Information (continued) Recommended Accessories U1174A Soft carrying case U5481B IR-to-USB cable U1782B SMB tweezer U1780A Power adaptor and cord (according to country) U1781A Alligator clip leads Learn more at: www.keysight.com For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Find us at www.keysight.