DuraWand Portable Scanner User’s Guide For Macintosh
The Videx DuraWand is the third bar code reader in the Videx line of portable bar code readers. The DuraWand combines the simplicity of TimeWand I and the durability of TimeWand II.
Replacing the Durawand Batteries REQUIRED ITEMS FOR BATTERY REPLACEMENT: Allen wrench to remove DuraWand end cap screw Four AAA nickel-cadmium batteries Remember to transfer the data from DuraWand using the Videx Downloader application before replacing batteries. DuraWand data will be erased when the end cap and batteries are removed. The following steps will guide you through replacing your DuraWand batteries: 1. Transfer your data from your DuraWand using the Videx Downloader application. 2.
5. Insert your DuraWand into the Recharger / Downloader Station. Perform a triple-beep reset by holding the scan button and turning the reset key. You will hear three beeps. (If you do not hear three beeps, double-check that the batteries are inserted correctly.) After you hear the three beeps signifying a triple-beep reset, release the scan button and return the reset key to the original position. 6. Press the scan button on the DuraWand: the “Transmit” light should flash. 7. Release the scan button.
Videx Downloader Application Instructions The Videx Downloader Application was developed to bypass communication problems that were often experienced when trying to import data directly into Alexandria V3. Copying the application from the disk or CD You will need to copy the application from the disk or CD onto your desktop or hard drive if it’s not already there. Keep the disk or CD for backup.
Programming The Durawand must be reset before programming can take place. Resetting your scanner will erase any and all bar codes that have already scanned. To reset your scanner press and hold the scan button and turn the key until you hear a series of three beeps. The three beeps indicate the reset was successful. Start the downloader program by double clicking on the “VidexDownloader” icon. This will bring up a window that says “Videx Download” at the top.
Uploading into Alexandria If Alexandria is not already running start it up now. To import the text file the Videx Downloader created enter the import command in the command line. V3 users, enter “ *@” and press the enter key. V5 users enter “*” and press the enter key. This command brings up a file selection window. If you saved your downloaded document to the default location which is the desktop then click the button on the right side of the window that says desktop.
2. Perform a single-beep reset to the DuraWand by turning the reset key. (Note: Do not press the scan button.) Return the reset key to the original position. Attempt to transfer the scan data from the DuraWand to your computer using the Videx Downloader application. If the DuraWand transfers the data, reprogram the DuraWand with the Videx Downloader application. If your DuraWand still does not transfer the data, go to step 3. 3.
