Product Manual

Item Name: 8000 Lumens LED Work Light with Quick Release Tripod & USB
Item Model Number: D4000DT-QR-U
Rev031317
Figure 1
How to Use:
Attach the light heads to the double handle using the star knobs included.
Attach the double light handle onto the tripod by clicking the bolt into place as shown in Figure 1. Adjust light to desired angle. Plug in
the light and press the black button located on the back of the area light to turn it on.
To remove the double light handle from the tripod, pull the star knob and lift to release the handle.
This light comes with a USB charging port on the back of the unit. Plug in a USB cord into the port to charge a device. (USB cord not
included)
Important Tips:
 This product is not waterproof
 It is not possible to change the LED light source
Specifications:
 Light Output/Lumen – 8000 Total Lumens
 Input Voltage Range – 100-240V
 Wattage – 70 Total Watts
 Efficacy (lumens per watt) - 114
 CCT - 4000K
 IP Rating - 44
 ETL listed
 18/3 SJT 6-ft. AC Power Cord
 USB Charging Port
3 Year Limited Warranty:
This product is guaranteed against failure due to factory defects in materials or workmanship for three (3) years from the date of
purchase. This warranty is non-transferable and applies only to the original owner. Proof of purchase is required for repair or
replacement. This warranty does not cover normal wear of parts or damage resulting from any misuse of the product. Misuse of the
product includes, but is not limited to: washing the product, using in extreme weather conditions, opening the product, or trying to
remodel the product. Important: this warranty is only valid if the product has been purchased through an authorized reseller.
Contact Information:
For questions regarding your product, please contact us at 303.652.6164 or e-mail us at [e-mail].
Quick Release