EVAPORATIVE COOLER 972-1001-W USER MANUAL Thanks for your support and choice of our unique evaporative cooler, in order to help you use the product properly, please read this manual before using the product. We hope that our product will being comfort and pleasure to you in your daily life. Contents I. Safety warnings and precautions………………………………………………...……3 II. Functions and Features……………………………………………………………………8 III. Names and Functions of Parts………………………………………………..………9 IV.
I. Safety warnings and precautions 1. Symbol meanings and description. In order to avoid dangers caused by disoperation and use the machine more conveniently, please pay attention to the following precautions which are indicated by icons. Please get familiar with the icons below, and read the Operating Instructions. Warning WARNING: 1.
Never insert wood sticks, metal sticks and other objects into the air inlet and outlet. It may lead to current leakage, short circuit and product damage. 注意触电 Do not spray insecticides or flammable sprays around the product. It may cause damage to the product. Make sure that no foreign matter is adhered to the power plug and insert the plug completely. It may cause current leakage.
The water level of the tank must not exceed the maximum level. When the cooling or humidification function is turned on, the water level shouldn’t be lower than the minimum level. Do not tilt or impact the device when placing or moving it after filling water, in order to prevent water spilling. Electric shock Must Obey If the product has ever inclined and there is water inside, immediately pull out the plug, and dry 24 hours before starting again.
III. Names and Functions of Parts Remote control Product structure Below is the operation panel of 972-1001-W On/Off Speed Swing Timing Cooling/Humidify Mode Display panel diagram 1. Control Panel 2.Blade 3.Function display window 4. CD grain decorative sheet 5. Front shell 6. Water level display window 7. Universal casters 8. Handle 9. Remote repository 10. Back Shell 11. Air filter 12. Power cord holder 13. Power cord 14. Water tank 15. Casters 16.
The operation panel of the remote control is subject to the importing country. are the default working states: - Normal mode by default after turning on, no LED display; - Digital tube displays ambient temperature, "C" indicator turns on; On/Off - Blade indicator is off; - Cooling/humidification are off; Speed - Start at medium level, turn to level low after three seconds; - Timer function is off, indicator turns off; Swing Mode 3.
mode, LED only displays the set level, which doesn’t change with the wind speed, same as (originally 50 seconds), and sends water shortage alarm. d. The quick water shortage detection is canceled after pressing the Power off button. natural wind. High speed: 30 minutes at high speed, 30 minutes at medium speed, 30 minutes at 2.
Use of remote control: 1. First open the battery cover in the rear side of the remote control and insert a 3V CR2032 battery. 2. To open the battery cover: First press in the direction of arrow 1 shown in the figure to detach the buckle of the battery cover, and then remove along the direction of arrow 2 3. When using, please aim at the receiver. 4. When the battery is exhausted, pull out the battery cover in the direction shown in the figure, and replace the battery (CR2032 3V).
therefore it should be cleaned at least once every month. 2. Connect the power and make sure that the product is working properly. Maintenance 1. Unplug the power cord, 2. First, take out the air filter, and then remove the wet curtain bracket assembly (operate as 1. If the product won’t be used for long, unplug the power cord, pack the device and prevent dust from entering. below). 2. Before packaging, the wet curtain and filter should be dry, and there is no water in the tank. VI.
One-Year Limited Warranty For a period of one year from the original purchase date, the manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty.
