Instructions / Assembly

7 8
 The water level of the tank must not
exceed the maximum level. When the
cooling or humidification function is
turned on, the water level shouldn’t be
lower than the minimum level.
 Do not tilt or impact the device when
placing or moving it after filling water, in
order to prevent water spilling.
 If the product has ever inclined and there
is water inside, immediately pull out the
plug, and dry 24 hours before starting
again.

If you go out or the device won’t be used
for a long time, turn it off and unplug the
power cord from the outlet.
 Do not use the device if children, animals
or persons lack of self-control are
unattended.
 Only use the power outlet
that meets
the requirements and the load capacity
of the outlet shouldn’t be lower than
20A/120V.
 Make sure that the supply voltage and
the voltage designated on the nameplate
are consistent.
 Confirm the voltage when the device is
moved.
 When the tank is filled with water, do
not lift the product by holding the
handle, or else the water in the tank will
overflow. Please push the handle. If
there is no water or little water in the
tank, you can hold the handle to lift the
device.
 During humidification, do not remove
the air filter and wet curtain bracket.
 It may cause water droplets ejection
from air outlet.
 Do not turn the blades with hands, or
else it will damage the synchronous
motor
II. Functions and Features
1. Wind mode: normal, natural, sleep, and smart
2. Three Levels: high, medium, and low;
3. Humidifying / cooling;
4. Timing shutdown: schedule time increases by 0.5h; maximum schedule time 8H;
5. Wind direction: 360° rotation of the blades;
6. Electronic key control, digital tube displays timing and temperature
7. Infrared remote control;
8. Full pumping water tank, easy to clean;
9. Ultra large high quality wet curtain with high evaporation and good cooling effect;
10. Spray water circulation cooling technology, large recycling capacity, faster cooling;
11. Power failure protection; tank water shortage protection
12. Double air filtration;
13. Universal front caster wheel design
必须执行
必须执行
一般性禁止
必须执行
Must Obey
Must Obey
Must Obey
General prohibition
Must Obey
Electric shock
Must Obey
Electric shock
必须执行
Must Obey