Instructions / Assembly

17 18
therefore it should be cleaned at least once every month.
1. Unplug the power cord,
2. First, take out the air filter, and then remove the wet curtain bracket assembly (operate as
below).
3. Clean the air filter with detergent and soft brush.
4. Soak the wet curtain assembly in cleaner for a few minutes, and then wash and dry.
 Tank cleaning
1. Unplug the power cord, turn the knob of water tank lock to the horizontal direction, and
take out the water tank.
2. Dampen the towel with detergent slightly and wipe the scale in the tank, then wash with
clean water and pour out the sewage.
 Machine surface cleaning
1. The device surface can be cleaned with damp cloth; do not rinse with water directly.
2. Do not use corrosive detergent or solvent for cleaning.
3. Turn off the power and unplug the power cord before cleaning, or else it may cause
electric shock.
 Install and use after cleaning
1. Install the air filter, wet curtain assembly and water tank in sequence, and ensure that the
installation is correct.
2. Connect the power and make sure that the product is working properly.
 Maintenance
1. If the product won’t be used for long, unplug the power cord, pack the device and
prevent dust from entering.
2. Before packaging, the wet curtain and filter should be dry, and there is no water in the
tank.
VI. Technical Parameters
Model 972-1001-W
Rated Voltage
120 V~
Rated Frequency 60Hz
Rated Power 90W
Noise (high level) ≤65dB
Rated Air Output 223.6 ft3/ mim
Rated Evaporation 29.5pints/h
Dimensions 15.9*13.6*36.6 inch
Unit Weight 17.6lbs