KSTSW08A KSTSW10A
Producto
Keystone. Keystone. 800-849-1112 keystonecs@keystone-products.com Keystone. Keystone. 800-849-1112 keystonecs@keystone-products.
IMPORTANT SAFETY INSTRUCTIONS READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
IMPORTANT SAFETY INSTRUCTIONS CAUTION ! When the air filter is to be removed, do not touch the metal parts of the unit. It may cause an injury. Do not put a pet or house plant where it will be exposed to direct air flow. This could injure the pet or plant. Do not use strong detergent such as wax or thinner but use a soft cloth. Appearance may be deteriorated due to change of product color or scratching of its surface. Do not clean the air conditioner with water.
IMPORTANT SAFETY INSTRUCTIONS WARNING NOTE: The power supply cord with this air conditioner contains a current detection device designed to reduce the risk of fire. Please refer to the section Operation of Current Device for details.In the event that the power supply cord is damaged, it cannot be repaired-it must be replaced with ac ordf romt heP roductM anufacturer. WARNING Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.
INSTALLATION INSTRUCTIONS If cold water pipe is interrupted by plastic, non-metallic gaskets, or other insulating materials, DO NOT use for grounding. Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded. DO NOT modify power supply cord plug. If it does not fit outlet, have a proper outlet installed by a qualified electrician. DO NOT have a fuse in the neutral or grounding circuit.
INSTALLATION INSTRUCTIONS 1. Make sure you have all the necessary parts. Installation kit contents: 1. Platform(1) 2. Support brace(1) 3. Adjustment bolt(1) 4. Hex flange nut - 1 / 4 (1) 5. Track seal(1) 6. Side channel seal(1) 7. Foam seal strip/Sash seal 8. Safety bracket(1) 9-11.Screw-2-1/2 (2), or Screw-1-3/4 (2), or Screw-1 (2) 12. Screw-3/4 (6) 13. Screw-3/4 self-threading(7) 14. Window locking bracket(1) 15. Plastic window panel(1) 16. Side channel(2) 17. Screw-3/8 (6) 18.
INSTALLATION INSTRUCTIONS 1 4 11 16 Alternate screw location (depending on the stool depth) Platform tab Window track 6 Window seal
INSTALLATION INSTRUCTIONS 7
INSTALLATION INSTRUCTIONS 1 8
or INSTALLATION INSTRUCTIONS 9
INSTALLATION INSTRUCTIONS or 3 10 4 or 1 3 4 or 1
INSTALLATION INSTRUCTIONS 11
INSTALLATION INSTRUCTIONS or 1 12
NORMAL SOUNDS High Pitched Chatter Vibration High efficiency compressors may have a high pitched chatter during the cooling cycle. Unit may vibrate and make noise because of poor wall or window construction or incorrect installation. Sound of Rushing Air At the front of the unit, you may hear the sound of rushing air being moved by the fan Pinging or Switching Droplets of water hitting condenser during normal operation may cause pinging or switching sounds.
AIR CONDITIONER FEATURES TO ADJUST FAN SPEEDS: TO SELECT THE OPERATING MODE: Press to select the Fan Speed in four steps-Auto, Low, Med or High. Each time the button is pressed, the fan speed mode is shifted. To choose operating mode, press Mode button.Each time you press the button, a mode is selected in a sequence that goes from Auto, Cool, Dry and Fan. The indicator light beside will be illuminated and remained on once the mode is selected.
AIR CONDITIONER FEATURES DISPLAYS: Exhaust Control Displays S Exhaust closed Timer off Energy Saver Timer on open Auto Cool Dry Fan Mode DISPLAYS: Shows the set temperature in OC or OF and the Auto-timer settings.While on Fan only mode,it shows the room temperature. Error codes: AS-Room temperature sensor error-Unplug the unit and plug it back in.If error repeats, call for service. NOTE:In Fan only mode,it will display LO or HI .
CARE AND CLEANING Cabinet Cleaning Air Filter Cleaning Take the filter by the center and pull up and out. Be sure to unplug the air conditioner to prevent shock or fire hazard. The cabinet and front may be dusted with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent. Rinse thoroughly and wipe dry. Never use harsh cleaners, wax or polish on the cabinet front. Be sure to wring excess water from the cloth before wiping around the controls.
TROUBLESHOOTING TIPS Problem Air conditioner cooling, but room is too warm- NO ice forming on cooling coil behind decorative front. Solution Dirty air filter- air restricted. Clean air filter. Refer to Care and Cleaning section. Temperature is set too High, set temperature to a Lower setting. Air directional louvers positioned improperly. Position louvers for better air distribution. Front of units is blocked by drapes, blinds, furniture, etc. - restricts air distribution.
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details.
