User's Manual

13
AP
OR100 Series
User Manual
Safety Precautions & Notices
 Read, follow, and keep these instructions.
 Read all warnings.
 Use attachments or accessories specified by the manufacturer only.
WARNING:
Do not use this product in a location that can be submerged by water.
Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning
Electrical Safety Information
 Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
 There are no operator serviceable parts inside this equipment. Service should be
provided only by a qualified service technician.
 This equipment is provided with a detachable power cord, which has an integral safety
ground wire intended for connection to a grounded safety outlet.
 Do not substitute the power cord with one that is not the provided approved type. Never
use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the
grounding wire.
 The equipment requires the use of the ground wire as a part of the safety certification,
modification or misuse can provide a shock hazard that can result in serious injury or
death.
 Contact a qualified electrician or the manufacturer if there are questions about the
installation prior to connecting the equipment.
 Protective Earthling is provided by Listed AC adapter. Building installation shall provide
appropriate short-circuit backup protection.
 Protective bonding must be installed in accordance with local national wiring rules and
regulations.