User's Manual

14
AP
OR100 Series
User Manual
Device Configuration
Power On-Device
 Connect the PoE Injector to AC power socket using a power cord.
 Now connect PoE In to PC and PoE Out to the device.
PC Configuration
Local PC IP Configuration
 Connect the Ethernet LAN cable to the Desktop/Laptop.
 Go to Control Panel> Network and Internet settings> Set up a new connection
 Configure the Desktop/Laptop with a static IP address of 192.168.1.10 and a subnet mask
of 255.255.255.0
The Desktop/Laptop accessing the device must be in the same subnet as that of the device.