User's Manual

OR100 Series

User Manual

Quick Start

This section will show you how to do a quick configuration for both the outdoor Access Point and

Subscriber Units using a web-based configuration interface.

Please refer Devices Access Types or use your Ethernet port or wireless network to access the AP/

SU and proceed

After connecting via any one of the three-device access methods, the GUI will prompt you to login

with a password. The default username and password are "admin” and should be changed

immediately after login to protect your network since it gives the user read - write privileges.

The password can be changed

Click Management > Services> HTTP > Admin password/ User / Super User/ Installer Password.

Web Configuration

 Launch any web browser on the PC that is connected to the device.

 In the URL type 192.168.1.1 and enter default credentials as username: admin and

password: admin

 Login and access the device settings in the GUI

Graphical User Interface Overview

Power on the Radio to access the Graphical User Interface (GUI). After a successful login, the user

notices a title bar on the top, a navigation pane on the left, and a content pane in the center. The

default page shown in the content pane is the “Summary”.

Home:

Click Home to return to the summary page, which displays all the key performance

parameters such as System, Network, Wireless, and Throughput.

Apply:

Click Apply to save all changes made to the configuration parameters

Reboot: Click to restart the device.

Logout:

Click Logout when necessary, make sure to click Apply to save the most recent updates.

Again, the login page is popped-out after a successful logout.