User's Manual

34
AP
OR100 Series
User Manual
Deny: If Deny is selected, only a particular SU is restricted.
The maximum number of SU’s that can be added to the MAC ACL table is 32
MAC ACL feature is applicable only in AP with 5 GHz / 2.4 GHz
DCS (Dynamic Channel Selection)
To enable DCS, Click Wireless> 5 GHz Radio Configuration> DCS
The DCS parameter allows an AP to monitor the retransmissions of packets transmitted to the
associated SU on the current operating channel. When the average of Local RTx percentage of
associated SU crosses user configured DCS threshold value, before switching to new channel, AP
evaluates local RTx percentage for 30 sec and triggers Spectrum Analyzer to scan the medium.
The Spectrum Analyzer scans for less interference channel and associates with SU to the best
channel available.
 This feature is available only in AP with 5GHz.
 The DCS threshold is user selectable range (0-100) % and is activated only when
DCS is enabled.
 Default chosen DCS threshold is 50%, when this percentage limit exceeds, the AP
activates spectrum analyzer.
 Respective logs will be generated under Monitor> Logs> Wireless section
for
example: <time stamp>: DCS triggered (when SU request AP) <Time stamp>: DCS selected
best channel (When AP assigns new channel to SU)
2.4GHz Radio Configurations
Properties