User's Manual

OR100 Series

User Manual

Upgrade:

 Select Image from the drop down of file type and upgrade.

 The firmware upgrade process happens in four phases:

 The TFTP firmware is uploaded from PC TFTP server path to the device.

 Verification: Verify the firmware to validate the checksum

 Upgrade: Write the new firmware into flash memory

 Reboot: Once flash write processes is completed, and then automatically reboot the

device.

 The whole firmware upgrade process takes around 6.30 minutes to complete.

 When upgrade process starts, all the existing links will be disconnected until it reboots

with new firmware.

 Due to the above fact, it is recommended to upgrade all remote devices and then

upgrade the local devices.

Retrieve

 The retrieved device config file will be stored in the PC TFTP Server path.

Reset

To Reset, Click Management > Upgrade/ Reset > Reset

This option allows user to reset all device configuration to factory defaults.

After reset, the device has to be accessed using the LAN interface locally and has to be re-

configured to allow the device to join into the network again.

Retain IP

If Retain IP is checked, the last IP before the reset will be recalled.