Instruction Manual

Instruction Manual
30
KGS Corporation
2.2.5 How to input braille data
There are two kinds of way to input braille text, when input them in the column of
“Braille:”.
(a) Standard input – translate the text input by a keyboard into braille one.
(b) 6-dots style – Six keys on keyboard are correspondent to each dot of braille one and
input the text by the way of combination of each dot.
Six keys on keyboard are assigned as following under the initial stage.
Dot 1: F Dot 4: J
Dot 2: D Dot 5: K
Dot 3: S Dot 6: L
The current input mode is displayed on the lower right-hand column of “Braille:”.
Click this input mode, and pop-up menu is displayed to change the mode.
(Keyboard operation) Push the Tab key on the column of “Braille:”, and focus moves to
the column of the input mode of “Braille:”.
2.2.6 Braille Translator Option
Translator function in Braille Labeler Utility has the following option.
"Use Grade II"
When this option is available, use Grade II Braille (particular braille
abbreviation) for translation.
When this option isn’t available, can’t use Grade II Braille.
This option is set to be available at the boot of Braille Labeler Utility.
Operate the following procedure, when you change the setting.