Instruction Manual

Instruction Manual
4
KGS Corporation
1. Preface
Thank you very much for your purchasing Braille Labeler BL-1000 LINK. Before
you’ll start to use it, we hope you have carefully read this instruction manual so
as to have fully understood each of the functions, please pay much your attention
about how to use it while keeping the instruction for use and duly confirm the
way of how to operate it.
Attention before use of BL-1000 LINK
Please make sure that you install the attached software in your PC first, before
Braille Labeler BL-1000 LINK connects to PC.
If BL-1000 LINK connects to PC before installation of USB Driver (attached
software), USB driver isn’t installed normally sometimes after it.
Please read and confirm “the chapter 1.8 preparation of PC to be connected”, in
this instruction manual before connecting BL-1000 LINK to PC.
1.1 Confirmation of contents in the package
The package of BL-1000 LINK includes the followings.
□ Braille Labeler BL-1000 LINK
□ AC Adaptor
□ Braille tape for BL-1000 LINK
□ Attached Software CD
□ USB cable
□ Instruction Manual Printed matter
□ Instruction Manual embossed dots