User Manual

ENGLISH

Aurora Series: Geng Started

DVR User’s Manual

Easy Network Setup

The outstanding feature of this DVR is that you do not need to do any complicated network sengs to set up the DVR

for remote live view on smart phone/pad/web browsers (MyKguard) or uploading images to Cloud.

In a DHCP typical personal home LAN (Local Area Network), basic steps are as below:

Basic Connecon for Remote Live View on Smart Phone/Pad

Step 1: Connect the DVR to network

a. Connect the power adapter to the DVR. See “Making Connecon” on page 13.

b. Connect a RJ-45 cable from the LAN port on the back of the DVR to an available port on a router.

Step 2: Install APP

Download KViewQR applicaon on your smart phone/pad.

Step 3: Add connected DVR and view Live screen

Add the connected DVR by scanning the QR code. Once the

router provides IP address to DVR, the Live screen appears.

Basic Connecon for Remote Live View on MyKguard

Step 1: Connect the DVR to network

a. Connect the power adapter to the DVR. See “Making Connecon” on page 13.

b. Connect a RJ-45 cable from the LAN port on the back of the DVR to an available port on a router.